Operating Steps of Live Cable Identifier

1. Connect the transmitting source: the live cable identifier inserts the red and black wiring plugs of the transmitting caliper a into the two red and black wiring posts corresponding to the transmitting source, and clamps the transmitting caliper a on the identified cable. The arrow on the transmitting caliper a points to the cable terminal. Both ends of the identified cable shall be reliably grounded. For cables that do not operate, the core wires at both ends can also be grounded. 2. Turn on the power switches of the transmitting source and receiver to check the direction: on the identified cable two meters away from the transmitting caliper, clamp the receiving caliper B to the cable, and the arrow on the caliper must point to the cable terminal. Then check the current direction and test connection direction. At this time, the pointer of the receiver ammeter must deflect to the right, and there is an audible and visual prompt at the same time. If the arrow of the receiving caliper B points to the transmitting source end, there will be no audible and visual prompt, and the pointer of the current meter will deflect to the left. Remember the deflection direction of the receiving caliper gauge. 3. Identification: at the identification point, use the receiving caliper B to identify each cable. During identification, the arrow on the receiving caliper must always point to the terminal direction of the cable, and the cable shall be clamped one by one. On the identified cable, the current meter pointer of the receiver must be deflected to the right, and the audible and visual alarm prompt shall be given at the same time. On other cables, the pointer of the receiver current meter must deflect to the left without audible and visual alarm. The pointer of the current meter of the receiver deflects to the right, and the audible and visual alarm prompt is the cable to be searched and identified. This test result is unique. That is, no matter how many cables there are in the cable trench, when each cable is identified with the receiving caliper B, only the receiver current meter pointer on one cable (the cable to be found and identified) deflects to the right and gives an audible and visual alarm. Dear customers: Hello, our company is a high-quality development group with strong technical force, providing users with high-quality products, complete solutions and superior technical services. The main products are underground cable fault tester, cable fault tester, cable fault tester, etc. The enterprise adheres to the tenet of building a business in good faith, keeping the business with quality and developing the business with enterprising. It continues to climb new peaks with a firmer pace and make contributions to the national automation industry. New and old customers are welcome to buy their favorite products at ease. We will serve you wholeheartedly!

Operating Steps of Live Cable Identifier 1

Operating steps of live cable identification instrument related articles
Theory of Cable Fault Locator
Function of Cable Fault Locator
Introduction of Underground Pipeline Detector
Brief Introduction of Cable Fault Locator
Working Principle of High Voltage Cable Fault Tester
During 15 years development, Noyafa has become the most famous brand in cable testing industry in China. With excellent production capability, reliable quality, good after-sales service, we get good reputation from customers all over the world.
no data
Contact Person:Lory Liu
Contact Us

+86-0755-27530990

If you have any question, please contact Lorry via

wire@noyafa.com

Add:Wanjing Business Center, #2506 Xinyu Road, Xinqiao, Baoan District, Shenzhen, China

Copyright © 2021 NOYAFA | Sitemap 

chat online
Please message us and we ensure to respond ASAP, what product you intrested in?