The working principle of the cable identification instrument needs to add a special signal to the identified cable, which should be received by a special receiver. Using this characteristic, the cable to be found can be identified. The cable identification instrument works according to the following principles: the cable identification instrument consists of a signal generator, a receiving clamp signal detector and an indicator. The signal generator mainly generates special pulse modulation signals, which are added to the stopped tested cable through the output line. The receiving clamp is used to find the tested cable on site. When the receiving clamp detector detects the special signal applied to the cable, The electric meter pointer on the signal detector swings synchronously with the frequency of the applied signal, while the signals detected on other cable lines are much smaller and in the opposite direction. It is easy to determine the tested cable by indicating the amplitude and direction of the electric meter. When the receiving clamp signal detector is used in combination with the signal generator, it can be used to distinguish the charged state of the cable, or assist in finding the short circuit position of the cable. When receiving clamp signal detector is used, clamp the cable with clamp. Dear customers: the company also has high-voltage cable fault locator, underground pipeline detector, power cable fault tester and other products. You can call the company's service phone through the web page to learn more product details. Perfect and beautiful service is our pursuit. New and old customers are welcome to buy their favorite products at ease. We will serve you wholeheartedly!