Rj11 Cable Tester Noyafa - - NOYAFA 1
Rj11 Cable Tester Noyafa - - NOYAFA 2
Rj11 Cable Tester Noyafa - - NOYAFA 3
Rj11 Cable Tester Noyafa - - NOYAFA 1
Rj11 Cable Tester Noyafa - - NOYAFA 2
Rj11 Cable Tester Noyafa - - NOYAFA 3

Rj11 Cable Tester Noyafa - - NOYAFA

1 Year
Place of Origin:
Shenzhen, China
Model Number:
Brand Name:

Company Advantages

· The quality of NOYAFA power cable finder is guaranteed by a series of tests. It has gone through fiber identification, performance testing, and flammability testing which all meet the textile standards.

· The product is not easy to fade. It is provided with a weather coat that is efficient in UV resistance and the blocking of sunlight exposure.

· Detailed operation procedure for phone line tracer will be provided in the form of video.


Noyafa NF-168V
Noyafa NF-168V multi function cable tracer with cable mapping and VFL functions for cable tracking and testing with 3 tracking modes,3 mapping modes


NF-168V/NF-168S is an updated item with multifunction of cable tracing,mapping and visual fault locator (this function is only for Nf-168v)accordingto sales requirements. It follows the shells of nf-168 emitter and receiverBut compared to series products, it's highlights is three tracing modes threemapping mods, and Visual fault locator. Tracing modes---ordinary tracing,Anti-interference, POE switch; Cable mapping--fast mode, Slow mode,Manual mode: Visual fault locator-continuous mode Pulse mode.



Rj11 Cable Tester Noyafa - - NOYAFA 4
Rj11 Cable Tester Noyafa - - NOYAFA 5


Product Interface and Keypad Introduction


Rj11 Cable Tester Noyafa - - NOYAFA 6



Operation Methods


Rj11 Cable Tester Noyafa - - NOYAFA 7
Basic tracing


Push the key to “SCAN” to enter the basic tracing mode, then blue indication flashes, which means the emitter works well. Connect one end of network cable/telephonecable(BNC cable only for NF-168S) to the RJ45/RJ11 (BNC cable only for NF-168S)port of launcher.




Push the key to “Basic”, the brightness of indicator and the sound of the speaker isdynamically changed according to the the signal strength. (note that in this mode, even if there is no signal, the indicator and the speaker will have a weak changed), whichmeans the receiver works well, then hold the receiver to find the target line.


Tracing mapping ( RJ45 as an example)


  •   Connect two ends of network calbe to the RJ45 port of launcher and receiver separately.
  •   And push the key to “test”, the wire sort indicators will flash, which means the transmitter works well.
  • ◪   If the wire is normal, and the GND is not connected, then the 8 indicators will flash one by one. And if GND is connected, then the 1 to 8 and G indicators will flash one by one.
  • ◪   If there is miswires as below. If line“2” is open, then the 2 indicator of emitter and receiver will not flash. If there is several lines are open, the corresponding indicators will not flash. And if less than 2 lines are connected, none of the lights is on. When the line are cross, for example, line“2” and line“3” disorder, the indicators flash as follows.
  • Transmitter : 1-2-3-4-5-6-7-8-G Receiver: 1-3-2-4-5-6-7-8-G
  • When there is short circuit of line“2” and “3”, the 2 and 3 indicators of receiver will not flash while the other lights still do.
Other Functions


(1) Low-voltage hint function

When the battery is low (≤6V), push the function button to “scan” or “test”, at this time, both the scan indicator and wire sorting indicator will flash, which means the battery should be replaced.


(2) Earphone function

The earphone can be worn in noisy environment for operation so as to avoid external interference. 


3) Sensitivity adjustment function

Turn the sensitivity adjustment knob on the receiver when tracing cable to adjust the value to be the appropriate degree.


(4) Floodlight function

The side floodlight can be started at night or in dark. The floodlight turns on so as to facilitate your normal operation. 


(5) Wire sorting directly with switch

Connect the line to be tested with transmitter and switch,then get the result from flashlights.




























Compatible cable RJ45, RJ11, BNC cable
Max. signal voltage 8±1.0Vp-p
Max valume 105dB 
Tone frequency 455Hz 
Tone mode 1 Tone
Ordinary tracing YES 
Anti-interference YES 
Distance of transmission RJ45 300M non-load/load 



VFL  (NF-168V)

Wave length  650nm 
Power  5mW
Mode Constant ight mode, Blinking mode
Mapping  Fast, slow, manual 
Battery Type  DC9.0V(6F22 DC9V x 1pcs)
Battery low indicate 6.0V±0.5V
Voltage protection DC 60V
Max. working current  Less than 100mA
Dimension(LxWxD) 146*57*30mm












Anti interference reception YES
Sensitivity adjust  YES 
Ordinary Huting  YES 
Earjack  YES 
LED lighting  YES 
Battery Type  DC9.0V(6F22 DC9V x 1pcs)
Power indicate  LED Power indicator 
Battery low indicate  6.0V±0.5V
Max. working current  ≤150mA
Dimension(LxWxD)  187*46*27mm



Company Features

· SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED, widely known as a credible China-based manufacturing company, has a strong ability in developing and producing hand held metal detector for wood.

· SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED has established a product development center. SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED pays attention to the advantage of technique. SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED has complete products category and strong technical force.

· SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED is committed to providing customers with high-quality hand held metal detector for wood, services and solutions. Check it!

Product Details

Our rj11 cable tester has better quality performance by virtue of the following excellent details.

Application of the Product

NOYAFA's rj11 cable tester is widely used in the industry.

NOYAFA has many years of industrial experience and great production capability. We are able to provide customers with quality and efficient one-stop solutions according to different needs of customers.

Product Comparison

rj11 cable tester is more competitive than other products in the same category, as shown in the following aspects.

Enterprise Advantages

We have a high-level R&D expert team and a high-quality staff team. Based on their strong production capacity, our company has developed rapidly.

As for the management of customer service, our company insists on integrating standardized service with personalized service, so as to fulfill different service needs of customers. Based on that, we could build a brand image of high-quality service.

We have always adhered to the enterprise spirit of 'pursuing excellent quality and creating a world-class brand'. We constantly innovate the management concept and the product vitality, and try our best to become a trustworthy enterprise.

NOYAFA was founded in On the basis of years of experience, we have become the leading model enterprise within the industry.

In recent years, NOYAFA has continuously optimized the export environment and has striven to expanded export channels. Besides, we have actively opened up the foreign market to change the simplex situation of the sales market. All these contribute to the increment of market share in the international market.

no data
latest products
no data
no data
Contact us
Leave a message
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
During 15 years development, Noyafa has become the most famous brand in cable testing industry in China. With excellent production capability, reliable quality, good after-sales service, we get good reputation from customers all over the world.
no data
Contact Person:Lory Liu
Contact Us


If you have any question, please contact Lorry via


Add:Wanjing Business Center, #2506 Xinyu Road, Xinqiao, Baoan District, Shenzhen, China

Copyright © 2021 NOYAFA | Sitemap 

chat online
Please message us and we ensure to respond ASAP, what product you intrested in?