Shenzhen NOYAFA Brand Rj11 Tester Manufacture 1
Shenzhen NOYAFA Brand Rj11 Tester Manufacture 2
Shenzhen NOYAFA Brand Rj11 Tester Manufacture 3
Shenzhen NOYAFA Brand Rj11 Tester Manufacture 1
Shenzhen NOYAFA Brand Rj11 Tester Manufacture 2
Shenzhen NOYAFA Brand Rj11 Tester Manufacture 3

Shenzhen NOYAFA Brand Rj11 Tester Manufacture

1 Year
Place of Origin:
Shenzhen, China
Model Number:
Brand Name:


Noyafa NF-168V
Noyafa NF-168V multi function cable tracer with cable mapping and VFL functions for cable tracking and testing with 3 tracking modes,3 mapping modes


NF-168V/NF-168S is an updated item with multifunction of cable tracing,mapping and visual fault locator (this function is only for Nf-168v)accordingto sales requirements. It follows the shells of nf-168 emitter and receiverBut compared to series products, it's highlights is three tracing modes threemapping mods, and Visual fault locator. Tracing modes---ordinary tracing,Anti-interference, POE switch; Cable mapping--fast mode, Slow mode,Manual mode: Visual fault locator-continuous mode Pulse mode.



Shenzhen NOYAFA Brand Rj11 Tester Manufacture 4
Shenzhen NOYAFA Brand Rj11 Tester Manufacture 5


Product Interface and Keypad Introduction


Shenzhen NOYAFA Brand Rj11 Tester Manufacture 6



Operation Methods


Shenzhen NOYAFA Brand Rj11 Tester Manufacture 7
Basic tracing


Push the key to “SCAN” to enter the basic tracing mode, then blue indication flashes, which means the emitter works well. Connect one end of network cable/telephonecable(BNC cable only for NF-168S) to the RJ45/RJ11 (BNC cable only for NF-168S)port of launcher.




Push the key to “Basic”, the brightness of indicator and the sound of the speaker isdynamically changed according to the the signal strength. (note that in this mode, even if there is no signal, the indicator and the speaker will have a weak changed), whichmeans the receiver works well, then hold the receiver to find the target line.


Tracing mapping ( RJ45 as an example)


  •   Connect two ends of network calbe to the RJ45 port of launcher and receiver separately.
  •   And push the key to “test”, the wire sort indicators will flash, which means the transmitter works well.
  • ◪   If the wire is normal, and the GND is not connected, then the 8 indicators will flash one by one. And if GND is connected, then the 1 to 8 and G indicators will flash one by one.
  • ◪   If there is miswires as below. If line“2” is open, then the 2 indicator of emitter and receiver will not flash. If there is several lines are open, the corresponding indicators will not flash. And if less than 2 lines are connected, none of the lights is on. When the line are cross, for example, line“2” and line“3” disorder, the indicators flash as follows.
  • Transmitter : 1-2-3-4-5-6-7-8-G Receiver: 1-3-2-4-5-6-7-8-G
  • When there is short circuit of line“2” and “3”, the 2 and 3 indicators of receiver will not flash while the other lights still do.
Other Functions


(1) Low-voltage hint function

When the battery is low (≤6V), push the function button to “scan” or “test”, at this time, both the scan indicator and wire sorting indicator will flash, which means the battery should be replaced.


(2) Earphone function

The earphone can be worn in noisy environment for operation so as to avoid external interference. 


3) Sensitivity adjustment function

Turn the sensitivity adjustment knob on the receiver when tracing cable to adjust the value to be the appropriate degree.


(4) Floodlight function

The side floodlight can be started at night or in dark. The floodlight turns on so as to facilitate your normal operation. 


(5) Wire sorting directly with switch

Connect the line to be tested with transmitter and switch,then get the result from flashlights.




























Compatible cable RJ45, RJ11, BNC cable
Max. signal voltage 8±1.0Vp-p
Max valume 105dB 
Tone frequency 455Hz 
Tone mode 1 Tone
Ordinary tracing YES 
Anti-interference YES 
Distance of transmission RJ45 300M non-load/load 



VFL  (NF-168V)

Wave length  650nm 
Power  5mW
Mode Constant ight mode, Blinking mode
Mapping  Fast, slow, manual 
Battery Type  DC9.0V(6F22 DC9V x 1pcs)
Battery low indicate 6.0V±0.5V
Voltage protection DC 60V
Max. working current  Less than 100mA
Dimension(LxWxD) 146*57*30mm












Anti interference reception YES
Sensitivity adjust  YES 
Ordinary Huting  YES 
Earjack  YES 
LED lighting  YES 
Battery Type  DC9.0V(6F22 DC9V x 1pcs)
Power indicate  LED Power indicator 
Battery low indicate  6.0V±0.5V
Max. working current  ≤150mA
Dimension(LxWxD)  187*46*27mm



Company Advantages

· thermal imager with moderate weight is easy in assembly, disassembly and transportation. Moreover, the reasonable floor area makes it suitable for temporary housing.

· Our professional and skilled quality control personnel carefully check the production process of each step of the product to ensure that its quality is maintained without any defects.

· SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED's technical service and development teams can help provide guidance on material selection.

Company Features

· SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED is a reliable and credible company in the market. We are an experienced laser distance measuring device manufacturer based in China.

· Since inception, NOYAFA has been committed to developing high quality products.

· Our service team in SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED is well-trained so as to provide satisfying service for customers. Inquire online!

Application of the Product

NOYAFA's rj11 tester is widely applicable in the industry.

NOYAFA is dedicated to solving your problems and providing you with one-stop and comprehensive solutions.

no data
no data
Contact us
Leave a message
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
During 15 years development, Noyafa has become the most famous brand in cable testing industry in China. With excellent production capability, reliable quality, good after-sales service, we get good reputation from customers all over the world.
no data
Contact Person:Lory Liu
Contact Us


If you have any question, please contact Lorry via

Add:Wanjing Business Center, #2506 Xinyu Road, Xinqiao, Baoan District, Shenzhen, China

Copyright © 2021 NOYAFA | Sitemap 

chat online
Please message us and we ensure to respond ASAP, what product you intrested in?