NOYAFA's Best Tone and Probe Kit

NOYAFA's Best Tone and Probe Kit

2021-10-25
NOYAFA
22

On this page, you can find quality content focused on best tone and probe kit. You can also get the latest products and articles that are related to best tone and probe kit for free. If you have any questions or want to get more information on best tone and probe kit, please feel free to contact us.

The manufacturing of best tone and probe kit is organized by SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED according to the advanced and lean production principles. We adopt lean manufacturing to improve material handling and quality, leading to a better product being delivered to the customer. And we utilize this principle for continuous improvement to cut waste and create values of the product.NOYAFA has successfully retained lots of satisfied customers with a widespread reputation for reliable and innovative products. We will continue to make product improvement in all respects, including appearance, usability, functionality, durability, etc. to increase the economic value of the product and earn more favor and support from global customers. The market prospects and development potential of our brand are believed to be optimistic.We are recognized not only for best tone and probe kit but also for the excellent services. At Best Cable Tester Supplier in China _ Noyafa, any questions, including but not limited to customization, sample, MOQ, and shipment, are welcome. We are always ready to offer services and receive feedbacks. We will make constant inputs and establish a team of professionals to serve all clients throughout the world!
more products
recommended articles
Info Center News
What Are the Test Steps for Cable Failure
What Are the Test Steps for Cable Failure
The detection of cable fault generally goes through four steps: diagnosis, ranging, path finding and fixed point. 1. Diagnose the nature of cable fault, that is, determine the type and severity of fault, so that testers can suit the remedy to the case and select appropriate cable fault location and fixed-point methods. Measure the fault resistance with a megger and multimeter to determine whether the cable fault is high resistance or low resistance; Flashover or closed fault; Whether it is grounding, short circuit, disconnection, or a mixture of them; Is it single-phase, two-phase or three-phase fault. 2. Ranging cable fault location, also known as rough measurement, uses instruments to determine the fault distance at one end of the cable. The common fault location methods on the site include classical bridge method and modern traveling wave method. Use jcd-971 cable fault locator or cd-71 cable fault locator. 3. Use pd2000 cable path identifier or cd-12 / 22 cable path identifier produced by Zibo Electric Co., Ltd. for path finding. 4. Fault location acoustic magnetic synchronization method: use cd-81 cable fault locator to synchronize with the discharged electromagnetic signal and digitally sample the sound signal, The sound waveform at the moment of discharge is displayed on the LCD screen. The waveform can be maintained continuously for the operator to distinguish carefully, avoiding the disadvantage of transient sound. Moreover, the actual discharge waveform is obviously different from the surrounding noise. More importantly, the sound waveforms of multiple discharges are very similar. When the sound waveforms of multiple discharges are observed to be the same, It can be clearly judged that the discharge sound has been collected. Because the response range of acoustic measurement method is generally very small, when the discharge sound is heard, it is very close to the fault point, generally not more than 5m, or even within 1-2m
Pulse Flashover Method for Fault Detection of High Voltage Cables
Pulse Flashover Method for Fault Detection of High Voltage Cables
Cable has a very important application scenario in our daily life. It can be said that we can't live without cable. In order to ensure the normal use of the cable, it is necessary to regularly detect and maintain the cable. In case of cable failure, the fault point shall be found out in time for maintenance. There are many cable fault maintenance methods. Today, I mainly introduce one of the high-voltage cable fault detection methods, pulse flashover method. For high resistance fault, due to the large resistance at the fault point, the reflection coefficient at this point is very small or almost equal to zero. When measured by low-voltage pulse method, the reflected pulse amplitude at the fault point is very small or there is no reflection, so the instrument can not distinguish it. There are two common high voltage flashover measurement methods, namely DC high voltage flashover measurement method (direct flashover method for short) and impulse high voltage flashover method (impulse flashover method for short). 1、 DC high voltage flashover method (referred to as direct flashover method) when the fault resistance is very high and a stable resistance channel has not been formed, the gradually increased DC voltage can be applied to the tested cable. After reaching a certain voltage value, the fault point is preferably broken down to form flashover. The flashover arc is used to form a short-circuit reflection on the added voltage, and the reflected echo is formed by a high resistance source at the input end to form an open circuit reflection. In this way, the voltage will be reflected many times between the input and the fault point until the energy is exhausted. 2、 Impulse high voltage flashover method (impulse flashover method for short) when the fault resistance is reduced and a stable resistance channel is formed, the DC high voltage cannot be added due to the limitation of equipment capacity. At this time, it is necessary to use impulse voltage test. The DC high voltage charges the cable through the ball gap until breakdown, and still generates short-circuit reflection with the flashover arc formed by it. The measuring inductance L shall be added at the cable input end to read the echo. The radio wave is reflected by short circuit at the fault point and l at the input end, and multiple reflections will be formed during this period. Due to the self induction phenomenon of inductance L, it begins to show open circuit reflection due to the current blocking effect of L, and shows short-circuit reflection after a certain time with the increase of current. The whole circuit consists of capacitor C and inductance L, which constitutes a large process of L-C discharge. Therefore, the wave process at the line input is a nearly attenuated cosine curve superimposed with fast pulse multiple reflection wave. 3、 High voltage cable fault detector is generally used. High voltage cable fault is high resistance fault, and high voltage flashover method is used to measure the distance of fault point. This method uses st-330b cable fault locator as experimental equipment. 1. Wiring mode: firstly, complete the wiring of high-voltage flashover as required; Then, connect the sampler with the ranging host with a double clamp test line, and then place the sampler next to the grounding wire of the high-voltage capacitor. 2. Equipment operation (1) start up, select the sampling method as flashover, the pulse width is the default, the cable type is the physical type, and the reading accuracy is the default. (2) Use the high-voltage equipment to discharge the cable, and then click the orange sampling button on the right to start sampling until the waveform is collected. Press the sampling key again to stop sampling. (3) Study the waveform, move the vernier ruler to the starting point and ending point of a waveform, read the waveform, and the distance of the fault point will be automatically measured in the upper left corner.
Principle and Application of Cable Oscillation Wave Test
Principle and Application of Cable Oscillation Wave Test
1、 Principle of cable oscillation wave test through cable oscillation wave test can not only diagnose the overall insulation of cable, but also test partial discharge and locate defects. The principle is LCR damping oscillation principle. On the basis of completing the cable pressurization, a damping oscillation voltage wave is formed through the built-in high-voltage reactor, high-voltage solid-state switch and the test cable. A sinusoidal voltage wave similar to the power frequency is applied to the test cable to excite the partial discharge signal at the potential defect of the cable. Based on the pulse current method, the partial discharge signal is detected with high sensitivity, and the detection, acquisition and upload of partial discharge signal are completed with high-speed data acquisition equipment. The single test process is about one minute, with high test efficiency and no damage to the tested cable. On the basis of obtaining the partial discharge data, the data analysis software automatically completes the cluster analysis and traveling wave positioning, which is convenient for users to comprehensively evaluate the cable state. 2、 Purpose: the cable oscillation wave test standard passes the field test to check the insulation condition and internal partial discharge condition of the cable without damaging the insulation of the cable itself, so as to evaluate the cable insulation. The high voltage unit of cable oscillation wave test can generate oscillation wave high voltage signal, and the high voltage generator can generate any high voltage of 0-30kv; For the partial discharge test device with no blind area from the partial discharge signal, there is no blind area, and it can detect the cable below 250m for partial discharge test; One laptop can be used for control; External safety control units such as operation software (Chinese / German / English version); Analysis software (Chinese / German / English version); A 7.5m high-voltage connecting line without partial discharge, with anti falling off safety design; The partial discharge under system voltage is less than 1pc III. cable oscillation wave test case analysis through the above understanding, let's talk about examples below, so that you can better understand its actual field use. Firstly, connect the test line according to the instructions, and then turn on the power supply. The waveform diagram during the test is as follows: through a waveform analysis, we found a damaged gap in the outer sheath at about 132M in the field survey, which is the cable insulation damage caused by external construction force. After disassembly, the main insulation is damaged
How to Choose the Right Bnc Coax Cable Tester
How to Choose the Right Bnc Coax Cable Tester
This type of cable supplies power to the device in question and transmits the video signal to the output. The prefabricated Siamese cable is available in various lengths to keep most camera cables at a distance. The optical cable tester includes a plug for visible light sources that is compatible with the optical cable installation.A cable tester is a microcontroller that displays and automates the test process and displays the test results for multi-wire cables. It connects to the end of the cable separately with a display of the current source portion to allow the injection of test current from one end of a cable to detect the results from a remote end.To check a USB cable, you can perform simple USB tests by connecting the cable end to the appropriate port on the cable tester. You can also check your cloud services, data communications and data transmission by testing connection stability with network cable testers.There are a number of methods to test coaxial cables to obtain a reliable signal frequency. Following are the steps to test a coaxial cable with the help of a multimeter probe. This is a reliable method to test the coaxial cable without signal loss.A network cable tester is a revolutionary device designed to test the reliability and capability of cable connections. It is a necessity for network technicians, network testers, cable testers and other related work in this field. Cable network testers are not only reliable, but also able to fix problems and help you identify cable problems and connection problems.The coaxial cable RG-179 uses a 7.5 Ohm BNC connector and can be used in high temperatures. RG-6 coaxial cable is the "coaxial cable for the Internet" - it is used to transmit the signal over the Internet connection (the Internet signal runs at a higher frequency than traditional analog video). It can be operated up to a distance of RG-59 without loss of the video signal, but it is a thick and rigid cable that is not comfortable to work with.The RG-174 coaxial cable uses the 50 ohm BNC connector and is thin enough for wide applications such as GPS navigation antennas for cars and many vehicles. RG58 coaxial cables use the 50 ohm BNC connectors and are versatile due to their performance. The RG-59 coaxial cable is used to transmit video signals from a CCTV camera to a monitor in another room.Although 75 Ohm coax is likely the impedance found in most of today's applications, it is important to note that all components of a coaxial cabling system must have the same impedance to avoid internal reflections at connecting points that can cause signal loss and poor video quality. High-capacity cables can distort the transmission of digital signals by reducing the distinction between graduated peaks and sinks. 75 ohm coaxial cables are therefore of great benefit for digital transmission, and their lower capacity than 50 ohm cables ensures that all digital transmission passes through the wire with minimal losses or distortions.Digital Signal 3 signals (DS3 signals), which are used to transmit data traffic to the control panels, are called T3 lines and use coaxial cables comprising 7.5 ohms (type 735) and type 734. Type 735 cables are used for distances of up to 6.9 metres, while type 734 cables can be used for distances of up to 13.7 metres.There are various types of adapters for BNC connectors, including T connectors, cylinder connectors and terminators. They can be plugged into any type of connector or SDI signal transport connector.Choosing the right cable is a major problem that plagues most companies and teams. Choosing the right BNC connector for the cable for your project comes at a price. To avoid problems with your network, use BNC connectors instead of compressing or bolting cables.This guide to cabling security cameras provides a practical explanation of the cable types of surveillance cameras and termination cables for easy installation. Siamese cables for surveillance cameras are a two-wire solution with a cable assembly that enables easy video and power transmission to the BNC camera. Curveball Cat5E and Cat6 cables are used to send the video signal to the camera using a video balun adapter.When using a video balun network, the cable does not tip over and requires the lead wire to be exposed by removing the outer layer of the wire at each end.Connect one end of the coaxial cable tester to the socket and bring the other end to a point where several coaxial signal cables meet. The video signal and power supply are transmitted via a single network cable, similar to how Siamese cables work. Another method for network cables is to crimp the RJ45 connector and plug it into the socket of a video power baloon.When you touch the multimeter probe on the end of the right coaxial cable, the meter reads 0 but you will see different readings on the other cables.If your coaxial cable is on the wall, connect an end of the coaxial cable tester to the wall plate and point the other end to the tester to facilitate assembly of the entire cable. To find the right cable, touch the cable one way or the other and a beep will be generated. If it is the antenna on your roof, you can use a multimeter with an aluminum coil to track the right end of a particular coaxial cable.Once you traced and identified the coaxial signal of the cable that you want to test with a multimeter, the next step is to figure out how to perform the task. Touch the center of the conductor end of your coaxial cable with the multimeter probe.Confirm that the shielding patency at both ends of your coaxial cable is in good condition. A second test should be performed on the coaxial cable to determine the status of the screen continuity.
Model Prototype Exercise: Handheld Electric Screwdriver
Model Prototype Exercise: Handheld Electric Screwdriver
To practice designing 3D low-fidelity prototypes, I was tasked to prototype an OXO handheld electric screwdriver as a new opportunity to expand their business into new product lines.Designing for OXOs Brand IdentityBefore sketching out design ideas, I wanted to familiarize myself with the OXO brand, hoping that the form of my design will match with OXOs brand identity. OXO incorporates comfortable and easy to use tools, while also applying simple,universal design. When I was sketching, I wanted to prioritize comfort, which is why the designs for the screwdriver include a hand grip area for the user to comfortably hold the screwdriver. I also attempted to emulate the simple designs of OXO, because the interfaces to be as minimalist as possible.Additionally, the sketches addressed the product requirements of a fluid speed control, a automatic screw driver selection (shape and size), direction mechanism (screwing in vs. screwing out), and a progress digital readout (number of screws in and out).PrototypeI created a handheld electric screwdriver prototype that is 6 inches long. With rocks and Easter eggs filled with rice inside, the prototype weighs one pound, emulating the actual weight of the product. Shape & FormI wanted the shape and form of the screwdriver to be comfortable and intuitive for the user. The handle on the screwdriver is slightly curved to emulate the natural grip when holding an object around your hand. I also included tape around the area to represent different material that would be incorporated for comfort. Additionally the handle is suitable for left-handed users or right-handed users.FunctionalityThere are several functionalities that make the prototype, including speed control, screw driver shape/size selection, screw driver direction, and a digital readout component. The screwdriver will also have a rechargeable battery. Fluid Speed Control Mechanism: I incorporated a fluid speed control under tucked in the handle for easy access to change the speed of the screwdriver while holding it at the same time. The sensor will capture the pressure of the grip and change the speed accordingly. The white thumbtack shown in the left image above is located where ones index finger would be, a intuitive hold and position to be controlling the speed. Screw Driver Selection Mechanism (shape/size): For the screw driver shape and size selection, this screwdriver supports 2 different head changes (Phillips or flat) and 5 different sizes. This screw driver shape and size is presented on a touch screen, where the user can tap to select different heads and sizes. After the user will press set for the screwdriver to automatically change shape/size. This interface is above the gripped area to avoid accidental switches in screw driver. Additionally the interface faces the user when they hold onto the screwdriver, allowing for easy visibility of the current setting of the screwdriver.Screw Driver Direction Mechanism: The screw driver direction mechanism is located on the side of the screwdriver with a slider mechanism to change the direction based on if the user is screwing in versus out. Digital Readout Component: The digital readout component shows the number of screw in and out below the direction mechanism. The reset button allows for the user to set the count back to 0.Rechargeable Battery: The screwdriver is rechargeable and the battery is placed inside the bottom of the screwdriver. AnalysisAfter finalizing the prototype, my peer members were able to give critiques and I was able to conduct one in-depth user test on all functionality. Click on the link below to view a snippet of the user test.What went well?Many users enjoyed the fit and weight of the prototype, explaining that the curved form of the screwdriver fit well with their grip and how they would intuitively hold the screwdriver. Users found the reset button on the count of the number of screws in and out practical and functional even thought it wasnt a product requirement.The speed control was intuitive for everyone, knowing that the harder they pressed the faster the head would turn. All users found the button placed in a comfortable position where their index finger was. The placement of the rechargeable battery was intuitive for all users.What needed improvement?Many users were confused with the digital readout component that indicates the count of screws in and out. Manyusers were unable to initially understand what the numbers stood for. There was uncertainty with the set button, expressing confusion on the ordering of changing the heads of the screwdriver. If the set button should be pressed before or after selecting the shape and size.The placement of the reset button may get in the way when gripping the screwdriver, possibly causing unintentionally reset of the digital readout. Additionally there was no way to reset only one of the digital readout numbers. So if a user wanted to reset only the number of screws in, this would not be possible.Takeaways & Next StepsOverall based on this analysis, the most effective component of the prototype was the shape/form of the screwdriver as well as the fluid speed control mechanisms. Both were praised and intuitive for users. However, the least effective component was the interface of the digital readout component. By using icons paired with labels of in and out the digital readout component can be more clear on what is being represented. Additionally if the slider is placed between the label and the actual readout component, the label would be on the top, possibly better indicating what the digital readout is and what the in and out slider does.Next steps would be to improve on the interfaces of the digital readout component, since this was the least effective functionality. After improving on the new interface, the next step is to do another round of critique and user testing. RELATED QUESTION Which is the best natural face mask for dark and oily skin? Hello there,The Best Face Mask for Oily SkinOily skin can be a major cause of acne because the pores are constantly clogged. This is why you need a great mask to help get rid of excess oil in the pores and on the skin.This mask works hard at regulating oiliness, soothing acne flare-ups and soothing the skin. To make the mask, you will need:1 apricot1 tablespoon of natural yogurt1/2 teaspoon of cosmetic clayDirections:Blend the apricot in a food processor. Add the yogurt and the clay and mix it until it becomes a smooth paste.Apply the mixture to your face and allow it to dry for 20 minutes before rinsing it off with lukewarm water. We love DIY face masks because of their easy to make recipes and all-natural ingredients.Heres some best face mask for all skin problems. You can make it easily at your home.1. The Activated Charcoal Acne Face Mask2. The Avocado & Honey Acne Blasting Face Mask3. The Honey Acne Face Mask4. The Cucumber Acne Face Mask5. The Turmeric Face Mask for Acne6. The Aloe Vera Acne Face Mask7. The Cinnamon Acne Face Mask8. The Apple Cider Acne-Fighting Face MaskGet the face mask recipe and benefits here:22 Of The Best Natural Face MasksI hope this might be help you to get rid of oily skin.Thank You!
Why CCTV Monitor Testers Is the Better of the Other
Why CCTV Monitor Testers Is the Better of the Other
CCV testers, also known as LCD field monitors or CCTV field monitors, provide installers with an ideal solution that allows them to view, calibrate and correct the camera's video feed in real time based on the additional features that they provide. The basic feature of a CCTV tester is an LCD display (25 inch x 3.5 inch diagonal) that allows the installer to view a camera feed on the spot. If the camera is set up in a separate area, the installer must run the feed to refine the settings.Other features of video calibration include video test patterns, the brightness, contrast and saturation adjustment, video signal intensity testing and support for PAL and NTSC video. Another aspect of the functionality that should not be overlooked by a CCTV tester is the ability to work with analog and IP cameras.If you are a professional installer, you probably have heard of closed circuit television testers (also called LCD field monitors, CCTV video testers, CCTV camera testers or IP camera testers). The ability of CCTV testers to work with both analogue and IP cameras is particularly important as digital surveillance cameras become increasingly popular. A closed circuit TV tester is a handy tool for professional CCTV installers and do-it-yourselfers to set up and configure CCTV cameras from any source.NKTech's 3.5-inch CCTV Tester is a portable device designed to install and maintain existing on-site CCTV video surveillance systems. The 1920x1200 resolution allows the 5-inch touchscreen IP camera tester to display network HD cameras and high resolution analog cameras. As with all our CCTV test monitors, we offer a one-year warranty of CCTV Camera Pro.All three options can be used together, but there is a higher tendency for IP camera systems than for digital video cameras. IP cameras have the ability to contain more cameras than one to cover wide angles captured by multiple cameras and camera systems to cover everything.The warranty does not cover operating system errors caused by third-party apps. On the Software Update screen, select Manual Updates and select Apps to Update. All features, including apps installed since the last factory reset, can be removed.Send your physical sample copy of your Dreiklang order to the address above. This allows you to store your videos in the cloud with EUFy's own subscription storage plan. For 10 days cloud video storage for a camera, you need to subscribe to a 200GB iCloud storage plan for $3 a month.Prisons use video surveillance to prevent drones from selling drugs and other contraband to prisoners. Disaster management uses CCTV cameras to allow emergency services and responders to assess and monitor events in real time and video the situation to the disaster management team.The CCV technology was first developed in 1942 by German scientists to monitor the launch of the V2 rocket. With road surveillance cameras and traffic lights, cities can monitor people, collect traffic statistics, evidence and speed. The legacy of the IoT (AOT) is the Chicago Initiative, which collects real-time weather and environmental data in Chicago.It is essential to constantly clean, pre-test and calibrate CCTV testers. To ensure accurate testing, it is important to study CCTV systems and conduct tests with tools that measure the performance of multiple indicators. A man on a ladder who manipulates a camera not only walks around, he measures the video signal and evaluates the running camera.This is a quick test for the effect of measuring the input and output video signal by examining a device. The same man who climbs a ladder and manipulates a camera can also do so with other video devices such as video splitters, disconnectors, switches, route switches, cable connectors, etc.With this connector we can connect the camera to its output and check the level of the video signal. It's a handy solution for men who have a ladder to manipulate the camera. You can connect the cable to the LED cable of the monitor to check the signal.Contrary to the impression, the 1.2V voltage causes many problems when we supply the camera with a long cable. The voltage loss caused by the greater resistance of the cable reduces the value of the camera clamp and interferes with proper operation.A tester with a USB port can charge mobile devices, but does not have a data interface. Android devices, mobile phones and tablets do not support hosting of USB sticks.As soon as the power switch is in position, press the power button to switch the tester to off mode and dim the backlight. The tester wakes up when the button is pressed. When the power switches are pressed and held down, the button selects the option Turn off to shut down the device.Brush - I could use two brass rods and a set of adapters for different brush sizes on a children's apron suitable for children 3-7 years. Bust 40, "Waist 38," Length 19 "(if you have smaller or larger sizes) Girl Nautical Miss Crab Fabric Personalized Crab.Note the handmade texture of the piece using hand stamping techniques using butterflies, butterfly cookie cutters, sunflowers and sugar. Hand cut and polished for participation in 2 Mineralogical exhibitions in Finland and Sweden, this is one favorite piece of ours that will be brought with you by Etsy if you wish a shipping offer for the purchase. The buyer of IP camera test equipment writes: "It is worth every penny.CCTV testers feature a colour LCD screen, video connection, rechargeable lithium batteries and several types of colour bars for signal output. A shopper who bought a CCTV camera tester used it to test his camera before he started installing it in his home.
Free Wire Tracker
Free Wire Tracker
Developing a good wire tracker would be one of the best things for any copywriter. This is because it will maximize the number of prospects you get to speak with and increase your revenue.The best wire tracker will tell you how many prospects have responded to your message, what they bought, which products they've tried and why. You can then read this information out loud during phone calls and in emails. This is crucial for turning your leads into sales!A wire tracker is a tool that allows you to find out what your competitors are working on. It shows you the products and services your competitors have launched, in case you need to know how to develop an effective marketing strategy.This article is relevant for digital agencies like us who often work with our clients and partners, who get involved in multi-channel marketing. This tool helps us identify opportunities, measure growth and feedback from customers.In the current digital era, it's becoming more and more frequent to use multiple platforms to share content. One such is Wire Tracker. The service is a mobile app that helps clients easily share content through messaging (text, image or video) by just tapping on the relevant options and pressing “Send” to send a message.There are many ways to track your copy. You can type it into a document or use an online tool. But which one is right for you?The best way to manage your time is by reducing it. The best way to do that is by using a wire tracker app.Wire trackers are a tool that helps in tracking the creation of content. They can be used on multiple channels, such as email, social media, blogs and so on. Wire trackers help us keep track of the work we are doing by providing us with a comprehensive overview of our work and allowing us to have an overview of our progress in completing tasks without having to keep track ourselves manually.Wire Tracker is a tool to help writers and copywriters to identify and track the words they use, those that come up in the content that they write.Wire tracking is a complex task that needs to be done by the best copywriters. They have to be able to understand the audience, present them with a compelling and relevant message, and craft innovative content that will convey the right message to their chosen audience.A wire tracker is a software application that allows you to keep track of your email and social media campaigns. It does this automatically, while you are busy with other tasks. No need to constantly check up on the status of your campaigns. It can also help you manage different strategies for each campaign and send out notifications when specific events occur or trends break out.Wire trackers can be used to automate the publishing process:Section topic: How can I improve my content writing skills?Introduction: A good content writer should be able to write a great first draft for each article they write. They should know their craft and be able to make sure their work will get published, so it does not suffer from editorial errors or lack of impactful elements. They should also be aware about how marketing works,The AI technology is a great way to automate repetitive tasks. For example, in the past, when you had to track all the content created by your staff, you would have to manually count them and check whether they were satisfied with their work. Now with Wire Tracker, you only have to count them and see if they are satisfiedWire Tracker is a tool that will not only automatically analyze all the content in your organization but it will also show how many people contributed to it. It can provide concrete evidence of what works and what needs improvement.Best Wire Tracker is a premium content creation service that offers top quality content for short period of time. It offers the best experience and features to its customers.We should not think of these AI writers as a replacement for human content writers. They just provide assistance to the content writers by getting rid of writer’s block and generating interesting and relevant ideas at scale.AI writing assistants are increasingly getting popular in the workplace. Some companies use them when they need to generate content for a specific topic or niche. While digital agencies use them to generate all kinds of content for their clients, but since it is very convenient, it has become one of the top trending topics in 2018 with businesses spending more money on this type of marketing automation service than ever before! The reason being that AI writing assistants
Basic Principle of Live Cable Identification Instrument
Basic Principle of Live Cable Identification Instrument
As the running live cable is not allowed to damage any grounding wire and other connecting wires, nor is it allowed to directly add the output signal of the live cable identifier transmitter to the cable phase line with high voltage. Two difficult problems need to be solved for live cable identification. One is how to couple the cable identification signal to the cable; Second, the coupled signal is generally small, and the operating cable may have 50Hz power frequency electromagnetic interference composed of 50Hz unbalanced current, induced 50Hz interference current, cable distributed capacitance current, etc. the high-sensitivity receiving caliper has the problem of how to resist 50Hz power frequency interference. The charged cable identification instrument developed by US adopts single chip microcomputer coding and decoding technology and PSK technology widely used in the field of communication. The phase coded signal with an average value of 0 is transmitted on the transmitting caliper, and the single chip microcomputer in the receiving caliper performs phase identification after filtering the received signal by hardware and software. When the receiving caliper cards the cable according to the current direction, the identified cable ammeter deviates to the right, accompanied by audible and visual indication. The current direction of other cables is opposite to that of the identified cable, and the ammeter pointer deviates to the left. No audible and visual indication. This reflects the uniqueness of the identified target cable. It is easy to distinguish the identified cable from multiple cables. In addition, since the signal current strength on the identified cable is the same throughout the line, the electromagnetic signal strength received by the receiving caliper along the cable is the same. In principle, the identified cable is not limited by the length of the identified cable. Dear customers: Hello, our company is a high-quality development group with strong technical force, providing users with high-quality products, complete solutions and superior technical services. The main products are high voltage cable fault tester, cable fault tester, underground cable fault tester, etc. The enterprise adheres to the tenet of building a business in good faith, keeping the business with quality and developing the business with enterprising. It continues to climb new peaks with a firmer pace and make contributions to the national automation industry. New and old customers are welcome to buy their favorite products at ease. We will serve you wholeheartedly!
no data
Contact Us
Leave a message
We welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
During 15 years development, Noyafa has become the most famous brand in cable testing industry in China. With excellent production capability, reliable quality, good after-sales service, we get good reputation from customers all over the world.
no data
Contact Person:Lory Liu
Contact Us

+86-0755-27530990

If you have any question, please contact Lorry via

wire@noyafa.com

Add:Wanjing Business Center, #2506 Xinyu Road, Xinqiao, Baoan District, Shenzhen, China

Copyright © 2021 NOYAFA | Sitemap 

chat online
Please message us and we ensure to respond ASAP, what product you intrested in?