Poe Network Tester Buying Guide

Poe Network Tester Buying Guide

2021-10-07
NOYAFA
35

On this page, you can find quality content focused on poe network tester. You can also get the latest products and articles that are related to poe network tester for free. If you have any questions or want to get more information on poe network tester, please feel free to contact us.

SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED is a poe network tester supplier which integrates the design, production, sales and service. We have successfully established rigorous production management system to enhance our management level and have been carrying out standardized production in accordance with national standards to ensure the quality. With years of sustainable development, we have occupied a very important position in the industry and created our own NOYAFA brand which bears the principle of "Quality First"and "Customer Foremost" as the basic principle in our mind.We have a range of industry-leading capabilities for markets around the world and sell our NOYAFA branded products to customers in numbers of nations. With a well-established international presence outside Chine, we maintain a network of local businesses serving customers in Asia, Europe, and other regions.We know that great customer service goes in pair with high quality communication. For example, if our customer comes with an issue at Best Cable Tester Supplier in China _ Noyafa, we keep the service team try not to make a phone call or write an e-mail directly to solve problems. We rather offer some alternative choices instead of one ready-made solution to customers.
more products
recommended articles
Info Center News
Fluke MicroScanner PoE Network Tester   Insight
Fluke MicroScanner PoE Network Tester Insight
When connected to an Ethernet Alliance certified power source, the device displays the maximum available power class in the microscanner POE compared to the required power, as the logo of the powered device shows. The performance requirements are marked with numbers from one to eight, indicating the amount of energy sources required in each class. Microscope POE kit for technicians $39 Copper Verifi-Ion Tester Swift Simple POE Verifier Ion.Mauritius, Mozambique, Rwanda, Seychelles, Somalia, South Sudan, Tanzania, 131. I purchased this tool in order to solve a recent installation of new Cat6 Ethernet cables in the range of 50-140 ft. Cat6 Gigabit Solid Conductor - Snagless UTP Ethernet Cable (RJ45M / M Blue) 7.5 ft (2,286 m ).These are quality certified cables with a bandwidth of up to 10 Gbit / s transmission speed. The cheaper $10 connectivity tester showed that the new Cat 6 Ethernet cables, which run in the 50-140ft range, were well connected, but I could see a pattern of failure when they eventually ran out of throughput on Iperf when they got 100Mbps connections. For 60 times the price, the tester ranged the cable up to $10, and he said the connectivity was fine.Communication technicians of today have much more problems than just wiring. Technicians need to rule out a whole range of cable service problems to determine the cause of connection problems. If you know anything about copper soldering, I found it in this article on HowStuffWorks.You may create your own design with washi ribbons in dark blue tones or elegant white lace trim if required for your order. Fluke Network Link Sprinter 100% Network Tester has a chamfer to fit different pipe sizes and thicknesses. Your motorcycle's Pro Life value is an essential product for motorcycle owners to protect your bike from weather damage. You can take off and leave no marks or stains, and we do not change the distance as required by the Fluke network clincher.James Sinn, owner of Sinn Development, an Oakville-based design, installation and troubleshooting service provider, said that the ability to display Switch ports, VLANs, PoE power and Ethernet information on LinkIQ-IE is a great addition to their toolkit. Fluke Networks says that by combining its state-of-the-art cable measurement technology with basic testing of industrial Ethernet switches, the Linkiq-IE accelerates and simplifies the detection of network failures with a touch screen interface similar to that of a smartphone. Link Sprinter Network Tester uses expert troubleshooting techniques with its colored LEDs to achieve actionable results with a LED interface that highlights problem areas, switch names and links between switches at the push of a button on each switch.The Link Sprinter Network Tester detects Ethernet problems in less than nine seconds. Read more about the increasing use of Ethernet in industry-based Automation World Research. MicroScanner (tm) PoE reduces confusion during your PoE installation by providing fast and easy PoE verification.
Best Cable Tester& Cable Tester Software
Best Cable Tester& Cable Tester Software
This article will help you find the best cable tester for your needs.A good cable tester is more than just a cable tester. It should be able to give a sufficient overview of the cable connections and be able to identify any problems with the connection.There are many different types of cable testers and they all do the same thing.In the cable industry, there is a need to test different cables, both for the purpose of quality assurance and in order to make sure that a certain product is compatible with different types of equipment.There are several software products available for testing cable, especially as they become more common in homes and businesses. Some of them have been designed specifically for testing cables. But the problem is that most of them require you to install it on your own computer or laptop first before you can use it. Some are hard to use and require too many settings so that you have to go through many options before finding an appropriate setting.This article will guide you through some tips on installing any cable tester properly so that you can quickly get your cable tested without having to do much research. It will also point out someWe have a cable tester, a type of cable plug that is used to ensure the quality of cables. The cable tester has four prongs and is connected to the main power supply by one wire. These wires are also connected in pairs: one goes to the positive terminal and another goes to the negative terminal. When you want to connect two wires together, you need to connect them first in pairs (with positive and negative terminals) and then separately in pairs (with positive and negative terminals) as shown below:In order for you to test whether or not two cables are connected properly, you will need a cable tester socket adapter. This device looks like an ordinary socket with only one wire on it. The connection between these two wires is made with an adapter. You can find theseIn order to make sure you get the best deals on TVs, Blu-ray players, etc., you need to do some research. You might have heard about a TV review site named "BestBuy" or a "Best Buy". You might also have found yourself going there to check out the latest offers only to be disappointed when your search didn't turn up anything interesting.As you've probably come to realize, there are a lot of possibilities when it comes to finding the best deals on TVs, Blu-ray players and other gadgets. But even if it is easier than ever before, there is still so much information that you need in order for these tradesmen and women to be able to offer quality recommendations.Best cable tester ensures that cables are properly connected to all the devices.With accurate, fast and reliable cable testers, you can easily save your business money.The cable tester software is an essential tool for any cable equipment buyer. It helps to assess the quality of a cable, measuring it's resistance and voltage.Cable testers have been in use since the 50's. The need for them is now less, but they are still widely used in the market.The best cable testers can help you to test Ethernet cables, power cables, phone wires and other wired connections. They also include various other inputs and outputs from home appliances like refrigerators, washing machines and dishwashers.The best cable testers can also be used in different situations to find out whether your device is working properly or not. If your computer isn't functioning properly, you should check the cable of it first before taking any action on it immediately to make sure that there are no faulty connections or miswired devices present in the system because of which your computer won't work properly at all. On the other hand if something goes wrong with a certain deviceToday's cable tester software/hardware is very sophisticated and works in a particular niche. This makes it a perfect fit for cable testers who are looking for precise information such as the channel number, the length of the cable and the condition of the cable.While there may be other software that can do these tasks, this software provides them quite well. This is why you should consider purchasing this software to get some competitive edge in your field.
How to Accurately Judge and Find Cable Fault
How to Accurately Judge and Find Cable Fault
Cable is an important part of signal equipment, but in the process of use, it is difficult for ordinary users to find the fault point, and they do not know what the reason is. Therefore, it is particularly important to quickly find the cable fault and judge the fault point. Wd-a10 cable fault tester is a set of comprehensive cable fault detector, which can test cable short circuit, cable disconnection, poor contact and other faults. By summarizing the previous experience, the factors affecting the test accuracy of cable fault tester are analyzed as follows. Since the accuracy of adjusting wave velocity is closely related to the accuracy of test, adjusting wave velocity has become the key to solve the problem. At least two conditions are required to accurately adjust the wave velocity: â‘ the length of the measured cable; â‘¡ There is a good core wire of the tested cable, which is not grounded. Adjust the measurement range without grounding. Connect a good core wire of the tested cable with a known length to the output port of the power cable fault tester and connect it with the red clip wire, the black clip wire and the ground, or another good core wire of the cable. Change the measurement range to match the actual length of the cable. If the actual length of the cable is less than 161.4m, the measurement range shall be adjusted to 161.4m; If the actual length of the cable is greater than 161.4 m and less than 322.8 m, adjust the measurement range to 322.8 m, and so on. The preset wave velocity is 200 220m / μ Set a wave velocity randomly between S and measure it as the wave velocity of the initial test. It is assumed that the wave velocity measured initially is 200 220 M / & mu; S is because the signal cables usually used are in this range. This step is very important. If this step is not set, the initial measured cable length is very different from the actual cable length, and it is difficult to adjust in the next step. After adjusting the wave velocity and measuring the distance of the fault point, compare it with the actual cable length. If the distance between the fault point displayed on the top of the screen is the same as the actual cable length, the original set wave speed, that is, the wave speed displayed on the screen is the actual wave speed of the cable. When testing any point fault of the cable, this wave speed can be used as the benchmark for testing; If the distance of the fault point displayed on the top of the screen is different from the actual cable length, you can simply adjust the wave speed with the cursor still, which can be large or small, so that the fault distance above the screen is the same as the actual length of the cable, then the adjusted wave speed is the actual wave speed of the cable. When testing the cable fault, you can use this wave speed as the benchmark.
Cable Tracker, Cable Management Software for Residential Homeowners
Cable Tracker, Cable Management Software for Residential Homeowners
Cable Tracker Software is a free software that allows you to track and control your cable network.It allows you to monitor incoming and outgoing cable signals and send email alerts when a signal goes down or up. You can also use it to manage your cables remotely, do security checks on them, as well as get updates on their status.The automated cable tracker can save you time by identifying all the cables that go to your property or business and follow them to determine the source of the power.Cable Tracker Software is the most popular software for monitoring your cable TV service. With Cable Tracker you can quickly and easily view your subscription history, watch TV shows, get alerts when new episodes of your favorite shows are on demand, set reminders to watch a show or go back to some other channel.It is a piece of software that tracks all the TV& cable channels for subscribers and shows the complete list of all channels in a user's reach.Cable Tracker Software is an office product that allows users to manage all their cable connections and subscriptions.Cable Tracker Software is a professional software for TV/Cable network data analysis. It detects the end-user channel usage and compares it to the cable's own data. It can also provide a report on the advertising commission paid to each of these channels.This section is dedicated to the latest technology that has been adopted in the industry.Choosing the right cable company is one of the most important decisions you can make. If you're going to buy your cable service, make sure that the options are in line with what is best for your needs.Cable Tracker for Residential and Business provides a number of different options to choose from and filters them according to features, price and package. The idea is simple: if you can't decide which option will be best for your needs, Cable Tracker should help you by giving an overview of all possible alternatives.The cable tracker is one of the best-selling digital video recorder products in the market. The device allows users to record all kinds of properties, such as homes, offices and shopping centers. This device has several benefits:We should not think of these devices as an alternative to traditional video recorder solutions. Instead they are a complementary tool that provides more features to enable better recording and longer recording times for a fixed price.Cable Tracker is an innovative, multi-dimensional tool that enables cable companies to monitor and track all the homes and businesses in their networks. Once installed, it provides data on subscribers, company owned IP address and IP port numbers, cable companies’ technical data such as fiber optic cables and access points, IP address for each customer’s account manager (AMR), etc. Also keeps track of numerous other details such as current/past billing cycle dates, internet traffic measurements (download/upload speeds), weather app usage (solar panel usage), etc.Cable Tracker Software is a tool for tracking and monitoring the internet cable TV network usage.In this chapter, we will get acquainted with the term “Cable Tracker”. The purpose of this software is to be a complete solution for creating content for cable channels and digital video distribution systems.This software can generate content templates in order to save time when creating content for various types of cable channels or other digital video distribution systems. It also allows you to make changes to the template before submitting it to your client.The "Cable Tracker" is a list of cable providers' basic cable packages. It has been used by millions of people all over the world and has been a best-seller for many weeks.Cable Tracker is a service that helps you find cable TV, broadband and voice services at any time.This is a section that I thought would be useful for readers. It's the one thing that if you are a content writer you will never forget. It’s the most important thing to keep in mind while writing your articles.Cable Tracker is a real-time tracking and monitoring tool that enables users to monitor their cable TV subscriptions, VOD services and internet usage.Note: Cable Tracker is developed by Esri. Esri provides using built-in tools to manage residential and business customers' cable TV, internet, telephone etc. usage with a single interface in the cloud.Section: Media personals for children in the 21st centuryIntroduction: In this section we will discuss the different ways in which children are trying to find their way into the media industry. We will discuss how they are using social media platforms like Facebook and Twitter, and Snapchat as well as traditional ways of finding jobs like news agencies or newspapers online. We will see how technology has helped them in terms of searching jobs but also how it has helped
How to Use the Cable Identifier and How to Judge Whether the Cable Is Live
How to Use the Cable Identifier and How to Judge Whether the Cable Is Live
How does the cable identifier judge whether the cable is live? First: why should we judge that the cable is live: as an important instrument of power cable detection instrument, cable identification instrument has been used more and more widely. When there are multiple cables in the cable trench, it is necessary to identify a specific power-off cable, calibrate, move or cut off the cable, and other cables in the cable trench operate live, so the cable identification instrument shall be used for cable identification. Second: easy to use: compared with the cable fault tester, the use of the cable identification instrument is relatively simple. It is easier to use it by reading the instructions. Third: test example: since the cable shielding layer is usually connected to the ground, if other cables are also connected to the public ground in the cable bundle, the black output jack on the generator can be connected to the public ground, The return current is distributed in several cable shielding layers, and the return current is divided into many tributaries, which means that the difference current of the identified cable is large and the useful signal is clear. "Difference" means that the output current and its divided return current are in the same channel. As shown in Figure 4, there are 5 cables in Figure 4. Cable 4 needs to be identified. The "output current" of the cables to be identified is 20A. Assuming that the return current is evenly distributed among the shielding layers of all cables, there should be a return current of 4A in the cable to be measured. The difference in the cable to be identified is: 20A (output) - 4a (return) = 16A (difference). How to use the cable identification instrument I. working method of the cable identification instrument: the transmitter (host) is powered by 220V AC power supply, which is used for the power-off The cable to be identified, plus a fixed period, unipolar DC pulse signal. The output line of the transmitter is connected to the cable core and the grounding point or ground nail. The armor of the cable is disconnected from the earth, and the core is connected to the grounding point or ground nail at the far end. The loop can conduct pulse current, which can be read out by the meter on the receiver of the identifier. The current is determined by the loop resistance, and the loop resistance should be as small as possible. The wiring diagram of the identifier is shown in Figure 2. Note: during field use, if the grounding resistance is too small, the output current of the transmitter will also be large when the output adjustment knob is turned back to zero, and the protection circuit in the transmitter will act (shown as a small fast swing of the meter). At this time, the randomly configured 1 ohm 20W high-power resistor can be connected in series in the transmitter circuit. After the transmitter and receiver start working normally, the voltage induced in the sensor coil is displayed in the receiver header. The pointer swing direction of the header can display the current direction, that is, only the cable with current flowing out, the pointer deflects and swings greatly. This is the cable to be found. For all other cables, only the return current flows, the pointer deflects in the opposite direction and the swing is very small. The output adjustment knob on the receiver can adjust the signal strength. 2、 Wiring mode: 1. Before the test, cut off the tested cable, and the surrounding environment shall be in a safe state. 2. The generator is connected with the tested cable, and the red clip is connected with one or several cores of the identified cable. Connect the black clip to the ground nail. 3. Connect the core wire at the far end of the cable to the ground nail. 4. Disconnect the armor at both ends of the cable from the ground wire. 5. Plug the power cord into the power outlet. 3、 Identify the cable through the loop test. 1. In order to ensure the normal use of the instrument, pay attention to setting the test loop. 2. Connect the red output jack to the core of the cable to be identified, connect the black output jack to the ground, and connect the cable core to the ground at the far end. As shown in Figure 3, 3. The output current flows to the far end in the direction of the arrow in the cable, and all cores of the identified cable can be connected together through the earth return generator to obtain a clearer signal.
Operating Instructions for Live Cable Identifier
Operating Instructions for Live Cable Identifier
1. Connect the transmitting source: the live cable identifier inserts the red and black wiring plugs of the transmitting caliper a into the two red and black wiring posts corresponding to the transmitting source, and clamps the transmitting caliper a on the identified cable. The arrow on the transmitting caliper a points to the cable terminal. Both ends of the identified cable shall be reliably grounded. For cables that do not operate, the core wires at both ends can also be grounded. 2. Turn on the power switches of the transmitting source and receiver to check the direction: on the identified cable two meters away from the transmitting caliper, clamp the receiving caliper B to the cable, and the arrow on the caliper must point to the cable terminal. Then check the current direction and test connection direction. At this time, the pointer of the receiver ammeter must deflect to the right, and there is an audible and visual prompt at the same time. If the arrow of the receiving caliper B points to the transmitting source end, there will be no audible and visual prompt, and the pointer of the current meter will deflect to the left. Remember the deflection direction of the receiving caliper gauge. 3. Identification: at the identification point, use the receiving caliper B to identify each cable. During identification, the arrow on the receiving caliper must always point to the terminal direction of the cable, and the cable shall be clamped one by one. On the identified cable, the current meter pointer of the receiver must be deflected to the right, and the audible and visual alarm prompt shall be given at the same time. On other cables, the pointer of the receiver current meter must deflect to the left without audible and visual alarm. The pointer of the current meter of the receiver deflects to the right, and the audible and visual alarm prompt is the cable to be searched and identified. This test result is unique. That is, no matter how many cables there are in the cable trench, when each cable is identified with the receiving caliper B, only the receiver current meter pointer on one cable (the cable to be found and identified) deflects to the right and gives an audible and visual alarm. Dear customers: Hello, our company is a high-quality development group with strong technical force, providing users with high-quality products, complete solutions and superior technical services. The main products are underground cable fault tester, cable fault tester, cable fault tester, etc. The enterprise adheres to the tenet of building a business in good faith, keeping the business with quality and developing the business with enterprising. It continues to climb new peaks with a firmer pace and make contributions to the national automation industry. New and old customers are welcome to buy their favorite products at ease. We will serve you wholeheartedly!
Why to Choose a Cable Continuity Testers for Your Home
Why to Choose a Cable Continuity Testers for Your Home
TCB360K1 Cable Prowler (tm) Pro Test Kit Full-color high-end cable length gauge with the ability to determine connection status and connectivity for POE detection. Klein Tools VDV501-823 VV Scout (r) Pro 2 Tester Kit Test Voice (RJ11-12) and Data (RJ45) via Video-to-F connector or coaxial connection. Before testing, make sure you remove the cable from your computer, modem or router.A cable tester checks the electrical connection between signal and cable and confirms that everything is wired correctly at both ends of the cable. With the HOSA CBT 500 you can test your cable gigging quickly and easily.Check that the cable connection you want to test is ready for analysis and that the tester is not electrocuted or that the device breaks. Test your network cables as with a network cable tester and run the test. If you connect both ends of the cable, a network cable tester will do the job for you and get an accurate reading of whether your cable is working or not.If you need to test voltage and current continuity, you should get an electric tester. With these testers you can test the cable against volts, current and ohms to check if the circuit is short-circuited through the cable. The testers can measure both AC and DC voltage and current in seconds.Continuity tests help to verify and reverse electrical circuit connections. For example, when two wires melt in a sheathed cable, a continuity detector lights up when you touch one probe with the black wire and the other with the white wire. Continuity testers are also excellent for checking if the wires are running smoothly and to see if the circuit is complete.Continuity checks can also be used to detect problems with cold soldering between wires or wire products. In addition, this type of electrical testing can also be used to check connection pads and traces on printed circuit boards (PCBs ).The most common and basic method to perform a continuity test with the help of a resistance tester is a simple multimeter function. Specialized continuity testers are available, but the most basic is an inexpensive light bulb that lights up when electricity is flowing. A digital multimeter continuity test can be used to test switches, switches, fuses, electrical connections, conductors and other components.A continuity tester consists of a battery, a housing, a probe connected to one end of the housing and a test wire connected to the other end with an Alligator clip. A continuity test on an electrical circuit is performed when it is not switched on by using a tester. To use a continuity tester, first pull the device off the connector and disassemble it to get to the component you want to test.Continuity testers are easy to understand: they consist of a battery housed in a housing, a cover, a probe for testing the wire, a tensed end of the battery in the housing and an alligator clip for the second end.A continuous tester is an electrical tester used to determine whether an electrical path has been created between two points [1] where an electrical circuit is produced. Its user-friendliness is determined by the fact that it is a power switch to determine whether an electrical device maintains a flowing current flow in its body. If this is not the case, it is used to find out the root of the problem within the device.Testers are excellent for checking whether a device is working properly, such as a single-pole switch, or for checking lamp wiring to see that electrical paths are intact. Make sure you turn off the power for the circuit or the device you are testing. These test tools allow network technicians to isolate cabling problems and network protocols to solve problems.This works with any coaxial cable with a special tester, whether you are using a VDV512 or 007. Like James Bond, the tester will spy on the cable and help you identify and label the right cable.A continuity tester is a special electrical device used to check the continuity of cables and wires in a circuit. A network tester calculates the signal and power transmitted from one end of a connection to the other in a twisted pair. If the cable is continuous, this means that all voltages applied to the cable are in the same place.If you want to check the quality of your cables, use a standard tester. Professional network testers are used in commercial environments and are used by certified professional cable installers to get the job done.Test tools do not provide bandwidth readiness information for high-speed data communication. Certification audits are a way for installers to ensure that the cable fed into the network meets TIA and ISO requirements. These tests are performed by professional network testers and certified installers.To help you find the best network and cable tester for your use, I have compiled a list of test products that work well. The LinkIQ cable network tester is easy to use as explains Eric Webb, Flukes Network Product Manager, in the video below. It shows the settings to use and how to use them to perform cable tests, save the results and upload them to linkware where they are available.I came across the Elegiant Network Cable Tester while working on establishing a LAN connection for a local company. With my extensive experience as an electrician, I can say that this is the best tool for testing cable connections.Selecting, selecting and purchasing a suitable network cable tester can be a complicated and challenging task. In this article, a great effort has been made to show you how to test the continuity of circuits and how a good continuity tester will handle your situation. This article examines which tools are best suited for normal cables, which are best suited for coaxial cables, which are to be used and which cable types are to be considered when measuring the limit values.
Working Principle of High Voltage Cable Fault Locator
Working Principle of High Voltage Cable Fault Locator
High voltage cable fault locator is a comprehensive cable fault detection instrument, which can test the high resistance flashover fault, high and low resistance grounding, short circuit, cable disconnection, poor contact and other faults of the cable. The cable fault locator is equipped with an acoustic pointing instrument, which can be used to accurately determine the accurate position of the fault point. It is especially suitable for testing power cables and communication cables of various models and different levels of voltage. The high voltage cable fault locator consists of three main parts: power cable fault tester host, cable fault locator and cable path tester. The host of the cable fault tester is used to measure the nature and total length of the cable fault and the approximate position between the cable fault point and the test end. The cable fault locator determines the exact location of the cable fault point based on the approximate location of the cable fault point determined by the host of the cable fault tester. For buried cables with unknown direction, a pathfinder shall be used to determine the underground direction of the cable. The basic method of power cable fault test is to apply high-voltage pulse to the fault power cable to produce breakdown at the cable fault point. When the cable fault breakdown point discharges, it generates electromagnetic wave and sound at the same time. Dear customers: Hello, our company is a high-quality development group with strong technical force, providing users with high-quality products, complete solutions and superior technical services. The main products are street lamp cable fault tester, underground pipeline detector, cable identification instrument, etc. The enterprise adheres to the tenet of building a business in good faith, keeping the business with quality and developing the business with enterprising. It continues to climb new peaks with a firmer pace and make contributions to the national automation industry. New and old customers are welcome to buy their favorite products at ease. We will serve you wholeheartedly!
Characteristics of Power Cable Fault Tester
Characteristics of Power Cable Fault Tester
Power cable fault tester is a special cable detection equipment used to solve the test of open circuit, short circuit, grounding, low resistance, high resistance flashover and high resistance leakage faults of power cables, as well as the accurate test of open circuit and short circuit faults of coaxial communication cables and local telephone cables. It can also test the cable path, buried depth, radio wave velocity, verify the cable length, and establish cable files for daily maintenance and management. Power cable fault tester is a powerful cable fault comprehensive test system with high-speed data acquisition and superior data processing ability, which is born by absorbing the advantages of 20 cable fault testers at home and abroad. Based on the industrial embedded computer platform system, she adopts today's advanced network and digital communication technology, which greatly improves the use function and test accuracy of the instrument. The test system consists of test host, fault locator and cable Pathfinder. It is used to test the open circuit, short circuit, grounding, low resistance, high resistance flashover and high resistance leakage faults of power cables, as well as the accurate open circuit and short circuit faults of coaxial communication cables and local telephone cables. It can also test the cable path, buried depth, radio wave velocity, verify the cable length, and establish cable files for daily maintenance and management. For the cable high resistance fault test, our company launched the domestic light and small portable cable fault high voltage signal generator, which has the advantages of simple test wiring, safety and portability, and is pioneered in China. Dear customers: Hello, our company is a high-quality development group with strong technical force, providing users with high-quality products, complete solutions and superior technical services. The main products are cable fault tester, underground pipeline detector, street lamp cable fault tester, etc. The enterprise adheres to the tenet of building a business in good faith, keeping the business with quality and developing the business with enterprising. It continues to climb new peaks with a firmer pace and make contributions to the national automation industry. New and old customers are welcome to buy their favorite products at ease. We will serve you wholeheartedly!
Model Prototype Exercise: Handheld Electric Screwdriver
Model Prototype Exercise: Handheld Electric Screwdriver
To practice designing 3D low-fidelity prototypes, I was tasked to prototype an OXO handheld electric screwdriver as a new opportunity to expand their business into new product lines.Designing for OXOs Brand IdentityBefore sketching out design ideas, I wanted to familiarize myself with the OXO brand, hoping that the form of my design will match with OXOs brand identity. OXO incorporates comfortable and easy to use tools, while also applying simple,universal design. When I was sketching, I wanted to prioritize comfort, which is why the designs for the screwdriver include a hand grip area for the user to comfortably hold the screwdriver. I also attempted to emulate the simple designs of OXO, because the interfaces to be as minimalist as possible.Additionally, the sketches addressed the product requirements of a fluid speed control, a automatic screw driver selection (shape and size), direction mechanism (screwing in vs. screwing out), and a progress digital readout (number of screws in and out).PrototypeI created a handheld electric screwdriver prototype that is 6 inches long. With rocks and Easter eggs filled with rice inside, the prototype weighs one pound, emulating the actual weight of the product. Shape & FormI wanted the shape and form of the screwdriver to be comfortable and intuitive for the user. The handle on the screwdriver is slightly curved to emulate the natural grip when holding an object around your hand. I also included tape around the area to represent different material that would be incorporated for comfort. Additionally the handle is suitable for left-handed users or right-handed users.FunctionalityThere are several functionalities that make the prototype, including speed control, screw driver shape/size selection, screw driver direction, and a digital readout component. The screwdriver will also have a rechargeable battery. Fluid Speed Control Mechanism: I incorporated a fluid speed control under tucked in the handle for easy access to change the speed of the screwdriver while holding it at the same time. The sensor will capture the pressure of the grip and change the speed accordingly. The white thumbtack shown in the left image above is located where ones index finger would be, a intuitive hold and position to be controlling the speed. Screw Driver Selection Mechanism (shape/size): For the screw driver shape and size selection, this screwdriver supports 2 different head changes (Phillips or flat) and 5 different sizes. This screw driver shape and size is presented on a touch screen, where the user can tap to select different heads and sizes. After the user will press set for the screwdriver to automatically change shape/size. This interface is above the gripped area to avoid accidental switches in screw driver. Additionally the interface faces the user when they hold onto the screwdriver, allowing for easy visibility of the current setting of the screwdriver.Screw Driver Direction Mechanism: The screw driver direction mechanism is located on the side of the screwdriver with a slider mechanism to change the direction based on if the user is screwing in versus out. Digital Readout Component: The digital readout component shows the number of screw in and out below the direction mechanism. The reset button allows for the user to set the count back to 0.Rechargeable Battery: The screwdriver is rechargeable and the battery is placed inside the bottom of the screwdriver. AnalysisAfter finalizing the prototype, my peer members were able to give critiques and I was able to conduct one in-depth user test on all functionality. Click on the link below to view a snippet of the user test.What went well?Many users enjoyed the fit and weight of the prototype, explaining that the curved form of the screwdriver fit well with their grip and how they would intuitively hold the screwdriver. Users found the reset button on the count of the number of screws in and out practical and functional even thought it wasnt a product requirement.The speed control was intuitive for everyone, knowing that the harder they pressed the faster the head would turn. All users found the button placed in a comfortable position where their index finger was. The placement of the rechargeable battery was intuitive for all users.What needed improvement?Many users were confused with the digital readout component that indicates the count of screws in and out. Manyusers were unable to initially understand what the numbers stood for. There was uncertainty with the set button, expressing confusion on the ordering of changing the heads of the screwdriver. If the set button should be pressed before or after selecting the shape and size.The placement of the reset button may get in the way when gripping the screwdriver, possibly causing unintentionally reset of the digital readout. Additionally there was no way to reset only one of the digital readout numbers. So if a user wanted to reset only the number of screws in, this would not be possible.Takeaways & Next StepsOverall based on this analysis, the most effective component of the prototype was the shape/form of the screwdriver as well as the fluid speed control mechanisms. Both were praised and intuitive for users. However, the least effective component was the interface of the digital readout component. By using icons paired with labels of in and out the digital readout component can be more clear on what is being represented. Additionally if the slider is placed between the label and the actual readout component, the label would be on the top, possibly better indicating what the digital readout is and what the in and out slider does.Next steps would be to improve on the interfaces of the digital readout component, since this was the least effective functionality. After improving on the new interface, the next step is to do another round of critique and user testing. RELATED QUESTION Which is the best natural face mask for dark and oily skin? Hello there,The Best Face Mask for Oily SkinOily skin can be a major cause of acne because the pores are constantly clogged. This is why you need a great mask to help get rid of excess oil in the pores and on the skin.This mask works hard at regulating oiliness, soothing acne flare-ups and soothing the skin. To make the mask, you will need:1 apricot1 tablespoon of natural yogurt1/2 teaspoon of cosmetic clayDirections:Blend the apricot in a food processor. Add the yogurt and the clay and mix it until it becomes a smooth paste.Apply the mixture to your face and allow it to dry for 20 minutes before rinsing it off with lukewarm water. We love DIY face masks because of their easy to make recipes and all-natural ingredients.Heres some best face mask for all skin problems. You can make it easily at your home.1. The Activated Charcoal Acne Face Mask2. The Avocado & Honey Acne Blasting Face Mask3. The Honey Acne Face Mask4. The Cucumber Acne Face Mask5. The Turmeric Face Mask for Acne6. The Aloe Vera Acne Face Mask7. The Cinnamon Acne Face Mask8. The Apple Cider Acne-Fighting Face MaskGet the face mask recipe and benefits here:22 Of The Best Natural Face MasksI hope this might be help you to get rid of oily skin.Thank You!
no data
Contact Us
Leave a message
We welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
During 15 years development, Noyafa has become the most famous brand in cable testing industry in China. With excellent production capability, reliable quality, good after-sales service, we get good reputation from customers all over the world.
no data
Contact Person:Lory Liu
Contact Us

+86-0755-27530990

If you have any question, please contact Lorry via

wire@noyafa.com

Add:Wanjing Business Center, #2506 Xinyu Road, Xinqiao, Baoan District, Shenzhen, China

Copyright © 2021 NOYAFA | Sitemap 

chat online
Please message us and we ensure to respond ASAP, what product you intrested in?