Shop Best Cctv Monitor Tester in NOYAFA

Shop Best Cctv Monitor Tester in NOYAFA

2021-10-21
NOYAFA
6

On this page, you can find quality content focused on cctv monitor tester. You can also get the latest products and articles that are related to cctv monitor tester for free. If you have any questions or want to get more information on cctv monitor tester, please feel free to contact us.

cctv monitor tester is highly maintained as the star product of SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED. Featured by using eco-friendly materials, the product stands out for its sustainable product life cycles. The quality control process is strictly implemented by a team of professional technicians to eliminate the defects. Besides, as we come to recognize the importance of customer feedback, the product is constantly improved to meet updated requirements.Many brands have lost their position in the fierce competition, but NOYAFA is still alive in the market, which should give the credit to our loyal and supportive customers and our well-planned market strategy. We clearly know that the most convincing way is to let customers get access to our products and test the quality and performance themselves. Therefore, we have actively participated in the exhibitions and warmly welcome customer's visit. Our business now has coverage in many countries.We are ready to assist you with the manufacture of custom-made cctv monitor tester and other products. We can also provide samples for testing. Best Cable Tester Supplier in China _ Noyafa also provides fast and safe shipment.
more products
recommended articles
Info Center News
Why CCTV Monitor Testers Is the Better of the Other
Why CCTV Monitor Testers Is the Better of the Other
CCV testers, also known as LCD field monitors or CCTV field monitors, provide installers with an ideal solution that allows them to view, calibrate and correct the camera's video feed in real time based on the additional features that they provide. The basic feature of a CCTV tester is an LCD display (25 inch x 3.5 inch diagonal) that allows the installer to view a camera feed on the spot. If the camera is set up in a separate area, the installer must run the feed to refine the settings.Other features of video calibration include video test patterns, the brightness, contrast and saturation adjustment, video signal intensity testing and support for PAL and NTSC video. Another aspect of the functionality that should not be overlooked by a CCTV tester is the ability to work with analog and IP cameras.If you are a professional installer, you probably have heard of closed circuit television testers (also called LCD field monitors, CCTV video testers, CCTV camera testers or IP camera testers). The ability of CCTV testers to work with both analogue and IP cameras is particularly important as digital surveillance cameras become increasingly popular. A closed circuit TV tester is a handy tool for professional CCTV installers and do-it-yourselfers to set up and configure CCTV cameras from any source.NKTech's 3.5-inch CCTV Tester is a portable device designed to install and maintain existing on-site CCTV video surveillance systems. The 1920x1200 resolution allows the 5-inch touchscreen IP camera tester to display network HD cameras and high resolution analog cameras. As with all our CCTV test monitors, we offer a one-year warranty of CCTV Camera Pro.All three options can be used together, but there is a higher tendency for IP camera systems than for digital video cameras. IP cameras have the ability to contain more cameras than one to cover wide angles captured by multiple cameras and camera systems to cover everything.The warranty does not cover operating system errors caused by third-party apps. On the Software Update screen, select Manual Updates and select Apps to Update. All features, including apps installed since the last factory reset, can be removed.Send your physical sample copy of your Dreiklang order to the address above. This allows you to store your videos in the cloud with EUFy's own subscription storage plan. For 10 days cloud video storage for a camera, you need to subscribe to a 200GB iCloud storage plan for $3 a month.Prisons use video surveillance to prevent drones from selling drugs and other contraband to prisoners. Disaster management uses CCTV cameras to allow emergency services and responders to assess and monitor events in real time and video the situation to the disaster management team.The CCV technology was first developed in 1942 by German scientists to monitor the launch of the V2 rocket. With road surveillance cameras and traffic lights, cities can monitor people, collect traffic statistics, evidence and speed. The legacy of the IoT (AOT) is the Chicago Initiative, which collects real-time weather and environmental data in Chicago.It is essential to constantly clean, pre-test and calibrate CCTV testers. To ensure accurate testing, it is important to study CCTV systems and conduct tests with tools that measure the performance of multiple indicators. A man on a ladder who manipulates a camera not only walks around, he measures the video signal and evaluates the running camera.This is a quick test for the effect of measuring the input and output video signal by examining a device. The same man who climbs a ladder and manipulates a camera can also do so with other video devices such as video splitters, disconnectors, switches, route switches, cable connectors, etc.With this connector we can connect the camera to its output and check the level of the video signal. It's a handy solution for men who have a ladder to manipulate the camera. You can connect the cable to the LED cable of the monitor to check the signal.Contrary to the impression, the 1.2V voltage causes many problems when we supply the camera with a long cable. The voltage loss caused by the greater resistance of the cable reduces the value of the camera clamp and interferes with proper operation.A tester with a USB port can charge mobile devices, but does not have a data interface. Android devices, mobile phones and tablets do not support hosting of USB sticks.As soon as the power switch is in position, press the power button to switch the tester to off mode and dim the backlight. The tester wakes up when the button is pressed. When the power switches are pressed and held down, the button selects the option Turn off to shut down the device.Brush - I could use two brass rods and a set of adapters for different brush sizes on a children's apron suitable for children 3-7 years. Bust 40, "Waist 38," Length 19 "(if you have smaller or larger sizes) Girl Nautical Miss Crab Fabric Personalized Crab.Note the handmade texture of the piece using hand stamping techniques using butterflies, butterfly cookie cutters, sunflowers and sugar. Hand cut and polished for participation in 2 Mineralogical exhibitions in Finland and Sweden, this is one favorite piece of ours that will be brought with you by Etsy if you wish a shipping offer for the purchase. The buyer of IP camera test equipment writes: "It is worth every penny.CCTV testers feature a colour LCD screen, video connection, rechargeable lithium batteries and several types of colour bars for signal output. A shopper who bought a CCTV camera tester used it to test his camera before he started installing it in his home.
The Basics of Using the CCTV Monitor Testers
The Basics of Using the CCTV Monitor Testers
Our security camera testers are designed to facilitate the installation, maintenance and testing of security cameras. All our CCTV test monitors are backed by a 1 year warranty from CCTV Camera Pro.CCV safety tester is a kind of multifunction test tool for CCTV security camera installation professionals. A CCTV tester (short for closed circuit television tester) is a tester and monitor that supports the installation and installation of CCTV security systems. It is used to check if the configured CCTV camera is in the right place, at the right angle, with free view and more.A CCTV tester can be used to display video, control the PTZ, generate images and acquire data from the RS485 test LAN cable. It also has a multi-meter feature to provide AC / DC voltage and resistance measurements to provide the installer with additional diagnostic capabilities to locate localized faults.The CCTV tester analyzes the video signal and displays peak, average video signal level, synchronization and pulse levels to determine the optimum level to display the best picture and synchronization to avoid cable loss. A multifunction tester can save you time and money on your next CCTV installation. In order to ensure accurate testing, it is important to study the CCTV system thoroughly and carry out a test with a tool that measures the performance of several indicators.Once the camera is set up in a separate area, the installer must run a video feed from the camera to refine the settings. Not only do you see the camera video and adjust the focus of the variofocal lens, you also have to supply the camera with its lithium-ion battery. This means a ride up and down the ladder to mount the camera, test the cables and adjust the settings.CCV testers, also known as LCD field monitors or CCTV field monitors, provide installers with an ideal solution that allows them to view, calibrate and correct the video feed of the camera in real time based on the additional features they provide. The basic features of a CCTV tester are an LCD screen (2.5 inch x 3.5 inch x 0.5 inch diagonal) that allows the installer to display a camera feed in place. Other features for video calibration include video test patterns, brightness, contrast and saturation adjustment, video test of signal intensity and support for PAL and NTSC video.The built-in 24-inch TFT LCD display enables the display and adjustment of camera settings and functions. The display monitor can also be connected to a DVR display to allow viewing of a CCTV camera with multiple cameras. The closed-circuit TV tester is a handy tool for professional installers of CCTV security systems and do-it-yourselfers to set up and configure a CCTV camera source.The NKTech 35-inch CCTV tester is a portable device designed to install and maintain existing on-site CCTV video surveillance systems. If you are a professional installer, you may have heard of closed circuit TV testing (also known as IP camera testers, CCTV video / LCD field monitors, CCTV camera testers or IP / CCTV camera testers ).The device can be used for TVI cameras as well as cameras in HD, SDI cameras and network IP cameras. IP cameras have the ability to record more than one camera and cover a wider angle, and can record multiple cameras so that the camera system is covered. The CCTV tester is handheld for good reason, it is for installation and convenience.Prisons use video surveillance to prevent drones from delivering drugs and other contraband to prisoners. Video encoders enable migration from an analog CCTV system to a network system, allowing users to take advantage of cheaper hardware with advanced features. There are three possibilities, which are used with high tendency: IP camera systems, digital video cameras or both.Perform real-time camera settings such as focus, zoom, optimization of advanced settings such as BLC, send-up, lighting adjustment, etc. Disaster management uses CCTV cameras for emergency services and responders to assess and monitor events in real time and report the situation to the disaster management team via video. City and community streets monitor cameras and traffic lights in cities to monitor people, collect traffic statistics, evidence and speed.A CCTV tester is a portable handheld service monitor that helps installers configure the camera at the touch of a finger. Market-buying reviewers looking for a video tester or an IP camera monitor kit can get an angle on where the camera is set up and how it should work. A shopper who bought a CCTV camera tester used it to test his camera before he started installing it in his home.The completion of the CAPTCHA proves that you are a human being and gives you temporary access to the web property. It takes 10-25 working days at best, and I cannot keep it in stock according to your order quantity. Your order has been put on hold for 14 days while we await the Woods trial.
Precautions for Optical Fiber Test and Installation
Precautions for Optical Fiber Test and Installation
Although optical brazing can provide a large bandwidth, its performance will be compromised if it is not deployed properly. Therefore, for enterprises with optical brazing needs, the author has the following suggestions.1、 Try to avoid macro and micro musicOptical brazing, like ordinary network cables, will also have signal degradation. Network cable is mainly caused by signal decay due to distance, while for optical fiber, it is mainly caused by improper installation. For example, if the optical fiber is stretched or bent too much, it may cause the fiber core to crack and have small cracks. A direct consequence of this is that light will scatter, resulting in signal attenuation. In addition, if the bending angle of the optical fiber is too large, the incident angle of the optical fiber contacting the core cladding interface will be changed. This makes the incident angle less than the critical angle of the total reflection angle. Note that at the bend, some optical signals cannot be reflected, but refracted into the covering layer and lost directly. Reflection, refraction, these professional terms may be difficult for readers to understand. In short, when deploying optical fiber, network administrators need to avoid the following two situations as far as possible.One is Hongqu. Macro area generally refers to the bending visible to the naked eye. Gently pull the optical fiber, you can see that the optical fiber is broken and sunk, as if it had been pressed by a heavy object. When the administrator accidentally bends the optical fiber, part of the light exceeds the critical angle, resulting in the light leaking out of the fiber core and into the covering layer. In general, once the light enters the cladding, it is difficult to return to the core again (even if it can, it is abandoned because the cost is too high). Usually, it will leak out directly through the buffer layer.The second is micro music. Micro bending and macro bending have the same reasons, which will cause the optical signal to exceed the critical angle and leak out of the fiber core. However, the external performance is different. The existence of Hongqu can generally be judged by the naked eye. In case of micro curvature, the amplitude of occurrence is very small, which is difficult to be found by the naked eye. In other words, general bending (such as rounding the optical fiber) does not necessarily lead to micro bending. Only bending under certain conditions can lead to micro bending.So in practice, how to avoid these two situations? A relatively simple method is not to press heavy objects on the optical fiber. Because of the long-term backlog of heavy objects, it is easy to cause optical fiber deformation, macro bending phenomenon and affect the transmission of optical fiber signal. In addition, when deploying optical fiber network, it is best to carefully observe the appearance of optical fiber. Because if macro music occurs, the appearance is obvious, which can be seen directly from the appearance (obvious backlog traces). If so, it's best to abandon this and optical fiber.Secondly, because the micro curvature is difficult to be observed by the naked eye, the help of the instrument may be needed at this time. Connect a test instrument at both ends of the optical fiber, and then you can check the attenuation degree of the optical fiber. If it is within the range allowed by the user, there is no problem if a little macro or micro music occurs. However, if its performance has been seriously affected, the optical fiber needs to be replaced.2、 Pay attention to whether there is an inner tube when purchasing optical fiberThe attenuation of optical fiber signal is largely related to its installation. Improper installation may lead to micro bending or macro bending. In order to avoid this situation as much as possible, many optical fiber manufacturers will add a layer of "inner tube" material to the optical fiber. The utility model relates to a material for stretching pipes, which can effectively avoid excessive bending of optical fibers.In terms of hardness, the inner tube is much harder than the optical fiber, so it is not easy to be excessively bent. Therefore, the optical fiber protected by the inner tube is usually not easy to bend. According to the laboratory test results, it can be found that the inner tube can indeed protect the optical fiber. It can not only improve the tensile amplitude of the optical fiber, but also ensure that the bending optical fiber is not too large. Of course, due to the addition of an inner tube, the cost will be much higher. Therefore, not every brand of optical fiber will do so. Enterprises need to pay attention to this problem when purchasing optical fiber.3、 Pay attention to the smoothness of both ends during installationThe process of installing optical fiber is much more complex than that of installing ordinary network cable. When installing the optical fiber, both ends of the optical fiber need to be cut. In addition, the smoothness of both ends must be ensured (usually, the smoothness of the end can be ensured by polishing and other means). If the terminal is not smooth, it will lead to signal attenuation. If the network administrator has the conditions, it is better to use a microscope or built-in amplification instrument to detect the smoothness of the optical fiber end to judge its smoothness. In short, it is necessary to ensure that both ends of the optical fiber are properly polished and shaped.After ensuring that both ends are smooth, carefully install the joints at both ends. The installation of this joint is also a technical work. Because if there is an error in the installation of the interface, such as improper splicing, or splicing two optical fibers with inconsistent dimensions together, the intensity of the optical signal will be reduced to a great extent. In general, optical fibers with different sizes are not recommended.After the optical fiber connector is connected, certain protective measures need to be taken. This is mainly because this part is the most likely place to cause signal leakage. If the end is dusty and unclean, it will cause great attenuation when the light reaches the receiver. Make sure that the connectors and fiber ends are clean if necessary. If necessary, it is also necessary to cover the end of the optical fiber with a protective film to prevent damage. Moreover, when connecting the optical fiber to the interface of the router or switch, it needs to be cleaned again. The cleaning method is relatively simple. Generally, you only need to wipe it with alcohol free lens paper. In order to avoid dust pollution, if there is an optical fiber interface on network equipment such as switches and routers, certain protective measures need to be taken when they are not used at ordinary times. If the port is covered, prevent dust from entering. When it is reused, it needs to be cleaned again. The cleaning method is the same as that of cleaning the joint. You only need to wipe it with special paper.4、 After installation, test and calculate the light lossEven if the deployment method is the most appropriate or the optical fiber is the best, it is still difficult to avoid the loss of optical signal in the end, but the degree of loss is different. If the loss degree of the optical signal is within the range that the user can tolerate, then it can. On the contrary, after the maximum limit of this user has been exceeded, it is necessary to analyze the causes and take corresponding measures.In practice, the unit of optical signal loss is measured by decibels (note that this is not a unit of sound). This unit indicates what percentage of the energy emitted by the transmitter is received by the receiver. Generally, you need to test after the first installation and confirm with the user whether you can accept this value. Note that this value needs to be recorded. This value needs to be used for reference in future maintenance. If it is found that the transmission performance of network data decreases in the process of use in the future. At this point, the administrator needs to retest it. If the test value is found to be the same as the original value, it means that there is no problem with the optical fiber, which is caused by the enterprise's own network. For example, it may be caused by the increase of data volume or the change of network architecture. It is necessary to optimize the enterprise's network. On the contrary, if the optical energy loss is found to be greater than the original, the problem that it may be an optical fiber or an optical fiber receiver transmitter must be considered. Check whether the protective layer of the optical fiber is damaged or whether there is a lot of dust on the interface, etc. It can be seen that the test of this optical fiber is very important. During the first test, the data obtained must be recorded in detail as the basis for future optical fiber maintenance and network optimization.
Common Detection Methods of Power Cable Fault Tester
Common Detection Methods of Power Cable Fault Tester
Power cable is an underground equipment. Generally, the soil layer plays a protective role for the cable. However, once a fault occurs, it is also very difficult to find it. It takes a lot of time, which is a great waste of human and material resources. In this case, it is necessary to use cable fault detection equipment, such as power cable fault tester. The initial measurement method of common fault cable is divided into control circuit bridge balance method, bottom pressure single pulse reflector method and flash detector method. In the initial measurement method of cable fault, the appropriate cable fault detector is adopted according to the different characteristics of common faults, The distance between the common fault point and the test case and the relative path of the common fault point are accurately measured and calculated by using the cable route technical document. There are three key methods of initial measurement: control circuit bridge balance method, bottom pressure single pulse reflector method and flash detector method. The method to improve the sensitivity of the galvanometer can refit the DC amplifier in front of the galvanometer, but the gain value of the amplifier is too high, resulting in serious zero drift and the bridge can not be balanced. When the working voltage of the switching power supply of the bridge rises, the compressive strength of the insulating layer of the bridge body to the ground must be relatively increased and the safety precautions for the maintenance and actual operation personnel shall be taken. When the working voltage of the switching power supply rises to a certain value, the common fault resistor is generally unstable. If the resistance of the grounding wire suddenly decreases to zero, High voltage will be applied to the bridge and the galvanometer will be damaged. Common use methods of power cable fault tester. The characteristics and provisions of the bridge method are: it is only applicable to accurately measure the server downtime in the cable line. If there are many other common fault points in the line, it can not be used. The less the jumper wire at the other end of the cable route, the higher the jumper wire. Its cross section shall be close to the cross section of the cable conductor, and the connection shall be tightened to make its contact resistance close to zero. When raising the experimental working voltage for fault test of high resistor grounding device, be sure to give a very safe prompt. After the common fault burn through equipment is used to convert the common fault of flashover into the common fault of grounding device, the power bridge method shall be used for accurate measurement immediately, so as to prevent the insulation layer from being repaired and the common fault point from being closed again. In addition, it is not necessary to burn the resistance of the grounding wire of common faults too low, so as to prevent the difficulty of producing too little sound when using the precise measuring point method. The bottom pressure single pulse reflector method, commonly known as the single pulse method, uses the basic principle of the radio wave reflector caused by the mismatch of wave impedance when the differential signal is dispersed in the cable line. The time of the single pulse wave reflector and the wave speed of the cable are measured on the digital oscilloscope to clarify the distance between the cable fault points. In general, the characteristic impedance in the cable line is not matched with the right point. In addition to the disconnection (lead) of the electrical conductor, short circuit fault and common faults of the grounding device, there are all points with uneven characteristic impedance at the cable joint and where the cable crosses the metal material pipeline, which will also cause the reflection surface of the wave. Be sure to identify them carefully during detection. Especially when the resistance of the grounding wire exceeds about 2 3 times of the wave impedance of the cable, the fluctuation amplitude of the reflecting surface is small, and it is impossible to identify common fault points. The single pulse method is most suitable for measuring the common faults of disconnection. In addition, it is also suitable for measuring the resistance of grounding wire less than 100 & omega; Faulty cable.
Cable Tracker and TV Antenna Finder
Cable Tracker and TV Antenna Finder
The introduction of cable trackerThe introduction of cable tracker is a crucial element in the history of cable TV. Even though it has been around for over two decades, it is still essential to understand its history and how it works.Tips for cable trackerIt is not a good idea to focus on only one topic. When you are writing a cable tracker, you do not want to work on the same topic all the time.Be creative and offer interesting angles on your topic. You can come up with multiple variations of the same thing to keep your audience engagedWriting for cable used to be very difficult and time-consuming. Now, with technological advancements, there are many ways of writing for cable that can be accomplished in an efficient manner.For example: You may want to write many short summaries that appeal to different target audiences at once (i.e., teenagers, young adults). Or you may want to use videos as well as text content since these two mediums are used very frequently by different segments of your audience (e.gHow to use cable tracker?In a recent survey covering 78% of the respondents, cable tracking was found to be the most important method for generating content ideas.The specifications of cable trackerWith the help of a cable tracker, the customer can be aware of where their cable is. This is very important for any business, and especially in the digital world.A cable tracker can be found in almost every household or business, but there is still a huge demand for it, which means that many companies do not have such a device in their offices. So to address this need, it was created so that even if you are at home and unable to get your hands on such a device, you still have access to information about your cables. For instance, if you are working from home and just need to know where your cable is located within the cables at home (or on the office), then this could be a helpful tool that could save you time and money.The product instructions of cable trackerSometimes, cable companies send you a bill for services that you have already paid for. The problem is that they don't tell you what the service actually does.There are plenty of reasons why the customer may want to know what their cable provider actually does.The application of cable trackerThe cable tracker is a product that helps customers to find out what channel you are watching. For example, it will show you the channels that you are watching and what time they are on. It also shows the summary of all channels that you have visited.
What Are the Precautions for High Voltage Test
What Are the Precautions for High Voltage Test
1. The first type of work ticket shall be filled in for high voltage test. Fill in a work ticket when an electrical connection part has maintenance and test at the same time. However, before the test, the permission of the person in charge of maintenance shall be obtained. After the work ticket for high voltage test is issued in the same electrical connection part, it is prohibited to issue the second work ticket. If the disconnection point between the pressurizing part and the maintenance part has enough safety distance according to the test voltage, and there is a short circuit on the other side, the series resonance can be tested on one side of the disconnection point, and the other side can continue to work, but at this time, a "stop, high voltage danger!" sign shall be hung at the disconnection point, and a special person shall be assigned to monitor it;2. There shall be no less than two persons for high-voltage test, and the person in charge of the test shall be an experienced person. Before the test, the person in charge of the test shall arrange the safety precautions in the test in detail for all test personnel;3. If the equipment connector needs to be disconnected due to the test, it shall be marked before disassembly and checked after connection;4. The metal shell of the test device shall be reliably grounded, the high-voltage Lead shall be shortened as far as possible and firmly supported with insulating materials when necessary. The power switch of the test device shall make the double knife switch obviously disconnected. In order to prevent false closing and switching, an insulating cover can be added on the knife edge. There shall be two series power switches in the low-voltage circuit of the test device, and an overload automatic switching device shall be installed;5. A barrier or fence shall be installed on the test site, a "stop, high voltage danger!" sign shall be hung outward, and someone shall be assigned to guard it. When both ends of the tested equipment are not in the same place, someone shall be assigned to guard the other point;6. Before pressurization, it must be carefully checked that the test wiring meter, the magnification, the zero position of the voltage regulator and the starting state of the instrument are correct. Inform relevant personnel to leave the tested equipment and obtain the permission of the person in charge before pressurization. There shall be monitoring and singing during pressurization. The staff of high voltage test shall concentrate on all pressurization and shall not chat with others, Be alert to abnormal phenomena at any time. The operator shall stand on the insulating pad;7. When changing the wiring or after the test, first disconnect the test power supply, discharge and short-circuit the high-voltage part of the booster equipment to the ground;8. The tested equipment of the large fuse without ground wire shall be discharged first and then tested. During the high voltage DC test, the equipment shall be discharged to the ground several times and short circuited to ground at the end of each paragraph or end;9. At the end of the test, the tester shall remove the self installed grounding short circuit, inspect the tested equipment and clean the site;
Structure of Mine Cable Fault Tester
Structure of Mine Cable Fault Tester
1. The mine cable fault tester is composed of control part (low voltage) and high voltage rectifier, discharge and test part. Sufficient safety space shall be reserved between high and low pressure room, high and low pressure room and shell. 2. In order to ensure the safety of equipment and personnel, special personnel must operate with keys before high-voltage startup. 3. During each flaw detection or cable test, it can ensure that the high voltage rises slowly from the zero position, with the shape of high and low voltage limit. The pressure rise or fall process is controlled by the button, the voltage rise and fall rate is stable, and the operation is safe and simple. 4. The DC withstand voltage test time can be automatically carried out after digital (or manually controlled), and the test time is accurate and reliable. 5. The leakage current can be measured at any time according to the needs of the withstand voltage test process. 6. The mine cable fault tester has over-current and short-circuit protection, startup warning and over-current protection. 7. The control panel is equipped with power switch, high-voltage start, high-voltage stop, step-up, step-down and other switches or buttons, voltage withstand test, digital time timing relay, etc. 8. There are high voltage, leakage current, low voltage total current and other measuring meters on the display board, power supply, high voltage, timing and other indicator lights, curve observation window for ball gap discharge, etc. 9. Special high voltage discharge * * is equipped for discharge after each flaw detection or test to ensure safety. There is a grounding mark at the bottom of the box. Dear customers: the company also has cable fault detector, buried cable fault detector and underground pipeline detector products. You can call the company's service phone through the web page to learn more product details. Perfect service is our pursuit. New and old customers are welcome to buy their favorite products at ease. We will serve you wholeheartedly!
Basic Knowledge of Cable Installation
Basic Knowledge of Cable Installation
Whether the cable is installed correctly or not is directly related to our personal safety, so it is very important to learn the correct cable installation method. First of all, we need to understand the precautions for cable installation: first, when the mining cable is placed in parallel with the heating pipeline, it shall be connected with a distance of 2m, and when interleaved, it shall be connected with a distance of 0.5m. Second, when the cable is placed in parallel or interleaved with other pipelines, it shall be connected with a distance of 0.5m. 3、 When the cable is directly buried, the direct burial depth of 1-35kV cable shall not be less than 0.7m. IV. when the cables of 10kV and below are placed in parallel, the clear distance between each other shall not be less than 0.1M, 10-35kV shall not be less than 0.25m, and the distance during interleaving shall not be less than 0.5m. V. the minimum bending radius of the cable shall not be less than 15d for multi-core cable and 20d for single core cable (D is the outer diameter of the cable). 6、 Discussion on 6kV and above cables. A. When placing the cable terminal, the semi-conductive barrier layer must be stripped off. The insulation shall not be damaged during operation. Knife marks and the environment with high and low resistance shall be prevented. If necessary, it shall be polished with sandpaper; The end of the barrier shall be flat, and the graphite layer (carbon particles) shall be broken and cleaned. B. The copper barrier and steel armor at the end of plastic insulated cable must be well grounded, and this criterion should also be observed for short routes to prevent electromotive force at the end of steel armor during three-phase unbalanced operation, even ignition and burning of sheath. Tinned braided copper wire shall be adopted for grounding outgoing line. Soldering iron shall be used for soldering when it is adjacent to cable copper strip, and blowtorch shall not be used for sealing welding to avoid burning insulation. C. The three-phase copper barrier shall be connected with the ground wire respectively. The detailed barrier ground wire and steel armor ground wire shall be led out separately and insulated from each other. The position of the welding ground wire shall be as low as possible. 7、 Fundamental requirements for cable terminal and center discussion: A. excellent conductor connection; b. The insulation is reliable. It is recommended to adopt radiation crosslinked heat shrinkable silicone rubber insulation material; c. Excellent sealing; d. Sufficient machine strength can comply with various operation conditions. 8、 The cable end must be waterproof and corroded by other corrosive materials to prevent breakdown caused by aging of insulation layer caused by water tree. 9、 Crane or forklift must be used for cable loading and unloading to prevent horizontal transportation and placement. Cable car must be used for large cable placement to avoid external force damage to the cable or scratch the insulation layer due to manual drag. 10、 If the cable cannot be laid in real time for some reason, it shall be stored in a dry place to prevent sunlight exposure, water inflow at the cable end, etc. Secondly, it is also a link that can not be underestimated, that is, it is necessary to conduct acceptance inspection on the installed cables to see if there are omissions. 1、 First, the user shall check and accept the cable to see if it is damaged, and the construction personnel shall test the resistance and insulation resistance of each cable with a multimeter to confirm whether the cable resistance and insulation are normal, and record it. 2、 The supervision personnel of the user are invited to accept the whole laying. The main acceptance items are: a) whether the insulation layer is laid smoothly; B) If reflective film is installed, check whether the laying of reflective film is smooth; C) Whether the barbed wire mesh is installed smoothly and fixed. D) After the heating cable is energized, check whether the surface temperature of the cable has increased significantly, and sign on the acceptance sheet for confirmation.
Cable Fault Test Procedure
Cable Fault Test Procedure
When using cable fault tester (echo method) to test cable fault, the following procedures shall be followed: â‘´ multimeter, megger or judge the nature of cable fault from the cable pre-test results. (2) select the appropriate test method according to the nature of cable fault: the pulse method is best used for low resistance fault and open circuit fault. Of course, the flashover method can also be used for low resistance fault. Flashover method (impulse l method) is best used for leakage high resistance fault, and direct flashover method can also be used for some leakage high resistance faults, but this is usually not done. Direct flashover method is best used for flashover high resistance fault, or both methods can be used to measure and compare each other to improve the accuracy of judgment. (3) select the working grounding point, and lead out two grounding wires respectively from the selected grounding point, one to the ground of the instrument and the other to the ground of the high-voltage equipment. The selection principle of working ground wire is to ensure that the test phase and it form a closed loop, so that the instrument can obtain the correct test waveform. It should also be noted that the working ground wire must be connected with the system to make the human, instrument ground, high-voltage equipment ground and the tested cable ground in the same position. To ensure personal safety and integrity of instruments and equipment. If the cable is in phase to phase fault, the working ground wire must be one of the phase wires, and the phase wire as the ground wire must be connected with the system ground. For the cable with lead-free bushing, most of the faults are discharged to the earth or space during the high-voltage flashover test. Theoretically, the fault also forms a closed loop relatively to ground or space, but in fact, the equivalent impedance in the loop is quite large, so the correct test waveform can not be obtained on the instrument. In case of this situation during the test, the method of directly fixing the suspicious fault point can be adopted to solve it. No matter what ground wire, its grounding point must be reliable. (4) test the total length of the cable with the pulse method to calibrate the radio wave transmission speed of the tested cable. (5) rough test the fault point according to the selected test method. (6) fix the fault point after rough measurement.
Composition of Cable Fault Tester
Composition of Cable Fault Tester
Composition of cable fault tester: the cable fault tester can test the high resistance flashover fault, high and low resistance grounding, short circuit, cable disconnection, poor contact and other faults of the cable. If equipped with an acoustic point tester, it can accurately determine the position of the fault point. It is especially suitable for testing power cables and communication cables of various models and different levels of voltage. System composition 1. Host of cable fault tester 2. Cable path and fault locator 3. Cable fault integrated high voltage generator 4. Cable identifier 5. High voltage cable safety pricker 6. High voltage equipment: current sampler, cable fault integrated high voltage generator, pulse capacitor, complete set of special test lines, etc. Cable fault tester is a set of comprehensive equipment. It is used to test the open circuit, short circuit, grounding, low resistance, high resistance flashover and high resistance leakage faults of power cables, as well as the open circuit and short circuit faults of coaxial communication cables and local telephone cables. It can also test the cable path, buried depth, radio wave velocity, verify the cable length, and establish cable files for daily maintenance and management. The instrument adopts a variety of detection methods, computer technology and microelectronic technology. It has the characteristics of high intelligence, complete functions, wide range of use, accurate test and convenient use.
no data
no data
Contact Us
Leave a message
We welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
During 15 years development, Noyafa has become the most famous brand in cable testing industry in China. With excellent production capability, reliable quality, good after-sales service, we get good reputation from customers all over the world.
no data
Contact Person:Lory Liu
Contact Us

+86-0755-27530990

If you have any question, please contact Lorry via

wire@noyafa.com

Add:Wanjing Business Center, #2506 Xinyu Road, Xinqiao, Baoan District, Shenzhen, China

Copyright © 2021 NOYAFA | Sitemap 

chat online
Please message us and we ensure to respond ASAP, what product you intrested in?