What Is Fiber Tester Kit?

What Is Fiber Tester Kit?

2021-10-22
NOYAFA
35

On this page, you can find quality content focused on fiber tester kit. You can also get the latest products and articles that are related to fiber tester kit for free. If you have any questions or want to get more information on fiber tester kit, please feel free to contact us.

The performance index of fiber tester kit is in the domestic leading position. Our company - SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED didn't design to industry standards, we design and develop beyond them. Adopting only the highest quality sustainable materials, the product is China-made with purity, craft and timeless appeal in mind. It meets some of the world’s most stringent performance standards.NOYAFA products have received praises incessantly. They feature high performance and are offered with favorable price. Based on the feedback from the market, it turns out that our products leave a deep impression on customers. Many customers prefer to repurchase from us and some of them choose us as their long-term partner. The influence of our products is constantly expanding in the industry.It is found to be true that fast delivery service is very pleasing and bring about great convenience for businesses. Thus, fiber tester kit at Best Cable Tester Supplier in China _ Noyafa is guaranteed with an on-time delivery service.
more products
recommended articles
Info Center News
Wire  Trackers
Wire Trackers
The introduction of wire trackerWire trackers are the latest trend in the fishing world. They are a device that is used to detect fish by sound. It emits an electric signal that is picked up by a receiver, giving you both your distance and direction from the fish. These devices come in handy especially when you don't have access to GPS or other methods of determining location.These devices are designed for both professionals and beginners alike and they are easy to use. Wire trackers are not only targeted towards fishermen but also for avid birdwatchers, hunters, hikers, geocachers, boaters and anyone who needs to know their distance from a particular point.Wire trackers have been around since the late 1970s but didn't become popular until about five years ago when they started becoming popular among professional fisherman in Europe andTips for wire trackerIn order to be successful in writing, it is important to understand the essence of wire tracking. With this explained, you will be able to write more professional content and grow your career.Wire tracking is a process where copywriters find out what a company's goals are and then create content that they can share with the company while also promoting their own work.It’s important for copywriters to know what sets them apart from wire trackers so that they can provide value-added services for their clients. This includes providing design services, social media engagement services, and website development services.How to use wire tracker?Wire trackers are not a brand new tool, but they are gaining traction as part of the marketing mix. They allow marketers to measure and analyze their online performance in real time.Many websites use wire trackers to measure whether the content they produce is performing well or not. This helps them generate accurate and relevant content that people want to read. The most effective wire tracker allows you to view your website from multiple different perspectives, including social media, search engines, referrals and more.Wire trackers can capture important information such as sentiment analysis or SEO insights on how visitors interact with a website’s content.The specifications of wire trackerWire trackers are used in construction to help builders measure walls. In houses, they are used for measuring and marking the location of electrical outlets or switches.When it comes to house constructions, wire trackers come in handy. They help with measuring and marking the location of outlets or switches. For other areas, they have been used in construction as well as architecture where they can be attached to beams or posts so that their lengths can be measured easily.The product instructions of wire trackerWire trackers are a type of wire used in electrical wiring. They serve to keep the individual strands of wire in one direction for easy wire routing.One of the most common uses for wire trackers is to organize and keep all the wires in one direction on a multistrand cable, as seen below:A typical use for these tools is to make sure that every single strand of wire can be routed together without having to untangle them or repeatedly check that they are properly connected.The application of wire trackerWiretracker is a device that has been used to create wire coat hangers and this tool is most often used in the manufacturing industry. It is also being used in construction and manufacturing industries. In the past, it was not possible to predict how much wire was needed for a particular project, but now with wire tracker it is possible to do so.Wire tracker makes sure that the process of production remains accurate by providing accurate data about the length of wire required for each stage.Wiretracker has made its way into many fields other than just manufacturing. For example, hospitals use it when they need to build their wards or construct space frames for their buildings.
Advantage Analysis of Cable Fault Tester
Advantage Analysis of Cable Fault Tester
With the development of the market, cable fault tester is mainly divided into common and three pulses. What are the advantages and functions of these two kinds? Yuange will explain them to you. [functional advantages of common cable fault tester] 1. It can measure high and low resistance faults of all cables below 35KV, with wide adaptability. 2. It has user-friendly software and full Chinese menu. Key definition is simple and clear. The measurement method is simple and fast. 3. Excellent fault detection success rate, test accuracy and test convenience. As the display terminal, the 4.8-inch color LCD touch screen has strong data processing ability and friendly display interface. 5. Sampling high voltage protection measures are provided. The test instrument will not crash and damage in the impact high-pressure environment. 6. With computer communication interface, it is convenient to save data and graphics in the computer. 7. No test blind area. 8. The built-in power supply can test the open circuit and low resistance short circuit faults of the cable in the environment without power supply. [functional advantages of triple pulse cable fault tester] 1. It can measure high and low resistance faults of all cables of 35kV and below, and has a wide range of adaptability. 2. The "three-stage pulse method" and "three-stage multiple pulse method" are adopted. At the same time, it also has the traditional high-voltage flashover method and low-voltage pulse method. 3. Any high resistance fault presents simple waveform characteristics similar to low voltage pulse short circuit fault, which is very easy to interpret. 4. It has user-friendly software and full Chinese menu. Key definition is simple and clear. The measurement method is simple and fast. 5. The central control unit is used for one key control to trigger three levels of signal output in sequence to ensure safety and success rate. The central control unit can prompt the operation steps and monitor the work process. 6. It has the function of test waveform storage, which can easily store the waveforms tested on site in the instrument according to the specified sequence for call and observation at any time. A large number of field test waveforms can be stored. 7. The measured fault point waveform and good phase full-length open circuit waveform can be displayed on the screen at the same time for the same screen comparison and superposition comparison, and the fault distance can be judged automatically. 8. 11 inch bright color touch LCD display, with strong data processing ability and friendly display interface. 9. Sampling high voltage protection measures are provided. 10. With 232 computer communication interface and USB communication interface, it is convenient to save data and graphics in the computer. 11. The built-in power supply can test the open circuit and low resistance short circuit faults of the cable in the environment without power supply. [functional advantages of cable fault locator] 1. The data display part adopts a highlighted 4.3-inch OLED color LCD to make the display interface clearer. 2. The function and parameter adjustment part adopts a one key programmable pulse coding keyboard, which makes the operation panel more concise and the operation more convenient. 3. The instrument will collect and display the waveform of the audio part in real time. The distance of the fault point can be roughly observed by observing the repetitive waveform characteristics and distance axis, and the operator is not easy to be tired. 4. There are single and continuous modes in the acoustic magnetic fixed-point mode. If the discharge frequency is too fast and the gap time is too short, the user can select the single mode to carefully analyze the relevant data such as the primary discharge waveform, and the waveform page turning is supported in the single mode. 5. In the acoustic signal acquisition, four filter bands are adopted, including low frequency band, intermediate frequency band, high frequency band and full frequency band, which can be selected by the user according to the actual situation on site. 6. The step voltage part adopts waveform display to continuously sample and refresh the signal, so that the user can enhance the continuity analysis of the signal and the resolution of the jump signal. 7. The step voltage part is subdivided into multiple gears, and the large signal is automatically attenuated during the adjustment process to ensure that the display signal is not limited when the maximum voltage amplitude within the test range is input. 8. FIR digital filtering technology is adopted for audio filtering, which makes the characteristic frequency band more obvious and the filtering performance better. 9. Display the distance of the fault point. The distance of the fault point can be displayed within 0-25m. 10. In continuous mode, the compressed waveform within 15m can be displayed. In single mode, the waveform within 15m can be analyzed.
Composition of Street Lamp Cable Fault Tester
Composition of Street Lamp Cable Fault Tester
The street lamp cable fault tester consists of rt-2133 cable fault tester host, rt-2132j cable fault locator and rt-2132f cable path tester. The host of rt-2133 cable fault tester is used to measure the nature of cable fault, the total length of the tested cable and the approximate position between the cable fault point and the test end. Rt-2132j cable fault pointing instrument determines the exact location of cable fault point based on the approximate location of cable fault point determined by the host of cable fault tester. For buried cables with unknown trend, cable Pathfinder shall be used to determine the trend of underground cables. If the specific direction of underground cables is known, cable Pathfinder may not be used. The host of rt-2133 cable fault tester can be directly connected with the notebook computer for easy management and operation. The rt-213x complete set of cable fault test instruments can quickly and accurately find the fault points of various cables. It is suitable for factories and mining enterprises, metallurgy, petrochemical systems, power plants, airports, railways, power supply and other departments. Rt-213x cable fault comprehensive tester is widely used to detect low resistance, short circuit, open circuit and various high resistance faults of aluminum core, copper core power cables, high-frequency coaxial cables and local telephone cables with different sections below 35KV. It is a necessary equipment to ensure safe power supply and a powerful assistant for cable production and maintenance workers. Dear customers: Hello, our company is a high-quality development group with strong technical force, providing users with high-quality products, complete solutions and superior technical services. The main products are high voltage cable fault tester, cable fault tester, underground pipeline detector, etc. The enterprise adheres to the tenet of building a business in good faith, keeping the business with quality and developing the business with enterprising. It continues to climb new peaks with a firmer pace and make contributions to the national automation industry. New and old customers are welcome to buy their favorite products at ease. We will serve you wholeheartedly!
Model Prototype: OXO Handheld Screwdriver
Model Prototype: OXO Handheld Screwdriver
This project focused on creating a low-fi 3D prototype of a potential design for a OXO electric handheld screwdriver with the following specifications:variable speed control you decide the mechanism/interaction and whether it is fluid or distinct settingsscrew-driver selection mechanism (either digital or non-digital your choice) allows you to automatically select and switch between either Phillips or flathead shape and five different sizes of each shape (for 10 total screwhead choices)screw-driver direction selection mechanism (non-digital) to either screw in or unscrewdigital readout (monochromatic, non-touch sensitive) of number of screws screwed and screws unscrewed for tracking your progress as a handypersoncan be used right or left-handedproduct dimensions are a minimum of 6 inches long and must be able to contain a rechargeable batteryproduct weight is between 11.5 poundsFor each of the feature criteria above, I came up with an idea for how I would implement it onto the prototype:Trigger pressure or wheel to control speedDouble wheel selection to change between head type and sizeA switch to control screw and unscrew optionsA digital number display to show the digital readoutA charging port and the end of the handleHere are my sketch ideas for how the features would look on the device:After sketching the prototype, I thought I had a pretty good idea of the layout of the controls but there were some things I realized as I was conceptualizing the design. There were a lot of features to implement onto the screwdriver that would be difficult to fit onto a handheld device so as I was sketching, I tried to consider space as a constraint. Another thing I noticed was that there was a big difference in readability between putting numbers side-by-side and one top of the other.PrototypeTo build my prototype I used cardboard and tape. I made the prototype larger than the actual size it would be so that I could clearly display the features and test the interface functionality with a user. Here is what the prototype looks like:AnalysisTo test this prototype, I sat down with a participant and asked them to screw in and unscrew a screw at a specified setting while vocalizing their thought process. The user was able to complete the task but there were a few features that were unclear.Features that were unclear to the user:Used the Phillips instead of a flat head on the screwThought the unscrew/screw switch was to activate the screw driverSuggested moving the placement of the controlsThings that went well:User was satisfied with the easy controlsWas easily held and comfortable in their handsAble to complete the task without major issuesThe prototype worked well to complete specified tasks but it was a challenge trying to fit all the features onto a small device. Another challenge was how to test a trigger that would rely on users pressure. Without outright telling the user how the device is reacting to their actions, it can be difficult to simulate. I would improve the layout of the controls by minimizing their size and moving the size selection to the handle. I would also use text instead of symbols to show the different screw head types because it seemed to confuse users during testing RELATED QUESTION What are POP materials when it comes to advertising? Here are the most common POP signage. The Pop Up Counter These are used when a brand wants to give out product samples or do product demos. Image source: Portable Counters | Exhibition Tables | Fast TAT AUS Wide The Cardboard Display Stands Bunting Flags Bunting flags are not as common as before however a small number of brands still use this. Image source: Shelf Talkers Product Bins These are some of the most popular displays that brands use to promote their products in-store.
Precautions for Use of Cable Fault Tester
Precautions for Use of Cable Fault Tester
The tester adopts low-voltage pulse method and high-voltage flashover method to detect various faults of cables, especially the flashover and high resistance faults of cables can be tested directly without burning through. If equipped with acoustic method pointing instrument, it can accurately determine the precise position of the fault.Precautions are as follows:1) First of all, it is necessary to list the possible causes of the fault and the basic situation of the cable, such as whether the fault is caused by operation or pre-test, whether it is a new cable or a cable with long operation time, the approximate length of the cable, whether there is a joint in the middle of the cable, whether the cable has failed before, whether the cable is directly buried or laid in the cable trench, and the type of cable, etc.2) Make sure that the cable is tested only when there is no power. Both ends of the cable of the cable fault tester must be disconnected from other lines to ensure that the cable is dead and the surrounding environment of the cable is in a safe state.3) The tester must pay attention to the operation safety. Before wiring with the cable each time, connect each phase line of the cable to the ground with a short line for discharge. During discharge, one end of the short line must be grounded and the other end must be connected to each phase line of the cable for discharge. For other electrical appliances, such as capacitors, test transformers, etc., pay attention to discharge before wiring and removing the connecting wire. In short, we should form operation habits and be not afraid of trouble. Before each operation, first pay attention to whether the operating electrical appliances are connected with the circuit, and then discharge before operation.4) When testing the cable fault tester, first use the low-voltage pulse function of the flash tester to test the full length of each phase of the cable respectively to see whether the test waveform is consistent during the three relative tests. For most high resistance faults, the test waveforms of each phase are consistent. For low resistance fault and high resistance fault with open phase fault, the fault phase test waveform is inconsistent with the total length of the tested cable, so the fault distance can be measured directly with low-voltage pulse.5) When the high voltage flashover method is used for testing, whether the cable fault is high resistance fault or low resistance fault, the high voltage impulse flashover method can be used for testing. For the low resistance or broken line fault that can directly test the fault distance with low-voltage pulse, it is generally necessary to use high-voltage impulse flash for verification test and accurate location of fault point.
Cable Fault Test Procedure
Cable Fault Test Procedure
When using cable fault tester (echo method) to test cable fault, the following procedures shall be followed: â‘´ multimeter, megger or judge the nature of cable fault from the cable pre-test results. (2) select the appropriate test method according to the nature of cable fault: the pulse method is best used for low resistance fault and open circuit fault. Of course, the flashover method can also be used for low resistance fault. Flashover method (impulse l method) is best used for leakage high resistance fault, and direct flashover method can also be used for some leakage high resistance faults, but this is usually not done. Direct flashover method is best used for flashover high resistance fault, or both methods can be used to measure and compare each other to improve the accuracy of judgment. (3) select the working grounding point, and lead out two grounding wires respectively from the selected grounding point, one to the ground of the instrument and the other to the ground of the high-voltage equipment. The selection principle of working ground wire is to ensure that the test phase and it form a closed loop, so that the instrument can obtain the correct test waveform. It should also be noted that the working ground wire must be connected with the system to make the human, instrument ground, high-voltage equipment ground and the tested cable ground in the same position. To ensure personal safety and integrity of instruments and equipment. If the cable is in phase to phase fault, the working ground wire must be one of the phase wires, and the phase wire as the ground wire must be connected with the system ground. For the cable with lead-free bushing, most of the faults are discharged to the earth or space during the high-voltage flashover test. Theoretically, the fault also forms a closed loop relatively to ground or space, but in fact, the equivalent impedance in the loop is quite large, so the correct test waveform can not be obtained on the instrument. In case of this situation during the test, the method of directly fixing the suspicious fault point can be adopted to solve it. No matter what ground wire, its grounding point must be reliable. (4) test the total length of the cable with the pulse method to calibrate the radio wave transmission speed of the tested cable. (5) rough test the fault point according to the selected test method. (6) fix the fault point after rough measurement.
How Much Do You Know About the Cable Fault Tester
How Much Do You Know About the Cable Fault Tester
In recent years, China's computer technology and electronic technology are developing rapidly, so the product performance of many industries has been continuously improved. The cable fault tester is also like this. Its functions are more reliable and rich, and its service life has been improved to a certain extent. Today we are going to talk about the new highlights of the cable fault detector. 1、 New intelligent modules are added to the cable fault test: new sensors such as optical fiber sensors, polymer sensors and biosensors continue to appear and will develop rapidly. 2、 The emergence of new cable fault test fieldbus structure: expand the self diagnosis function of cable fault test instrument and facilitate maintenance. The connection of cable test system is more reliable and simple. Therefore, the installation cost is greatly reduced and the control scale is variable. 3、 Function integration of electronic cable test system: it is more closely combined with computer, power electronic devices and strong current control, and the continuous control and intermittent control are used at the same time. In the selection of cable fault tester, such products can be scientifically selected according to the cable characteristics of their industry, and the most suitable tester combination can be selected, which can greatly improve the work efficiency and avoid unnecessary waste of funds. At present, the cable fault testers used by power departments are basically designed and produced based on the principle of impulse flash method; In terms of its principle, it is most appropriate to solve the high resistance leakage and high resistance flashover faults. At this time, when the fault point is discharged, the voltage is high and the sound is loud, so it is easy to point on the ground. At present, there is only one solution in the world, but such faults are not very common. Use advantages: 1. Complete functions, safe, rapid and accurate test failure. 2. The instrument adopts low-voltage pulse method and high-voltage flashover method to detect various cable faults. It can directly test the flashover and high resistance faults of power cables without burning through. If equipped with a sound point meter, the position of the fault point can be measured accurately. 2. High test accuracy. The instrument adopts high-speed data sampling technology, with reading resolution of 1m and high intelligence. The test results are automatically displayed on the large screen LCD with small and data, and the fault judgment is intuitive. It is also equipped with menu display operation function, without special training for operators. 3. It has the functions of wave opening, parameter storage and call out. Nonvolatile devices are adopted, and the waveform and data are not volatile after shutdown. 4. With dual trace display function. The test waveform of the fault cable fault tester can be compared with the normal waveform, which is conducive to further judgment of the fault. 5. With waveform scaling function. Changing the waveform proportion can expand the waveform for accurate test. 6. Control the measurement cursor to automatically search along the line and stop automatically at the inflection point of the fault waveform. 7. The position of the double cursor can be changed arbitrarily to directly display the direct distance or relative distance between the fault point and the test point. 8. With printing function. Print and archive the test results.
A Wire Tester for Discovering Network Security Issues
A Wire Tester for Discovering Network Security Issues
Wire Tester and Site Auditor is an app for security testing which can be used by anyone, not just techies. It offers a list of commonly used tools to test websites or applications for vulnerabilities.A software developer needs to test web applications and mobile apps. Wire tester is a valuable tool for developers to test the application. They need to know about the security of the system in advance so that they can take appropriate measures.## "Wire Tester" (WIT) is the name given to the automated testing tool.It can perform a variety of tasks including:a) Web application security testing;b) WordPress/PHP security; and,c) Flex application testing. It also has the "Suspend/Resume" feature which allows you to save a session and resume it at will. It performs automation on web applications as well as other types of Internet applications. These include web servers, FTP servers, mail servers, etc., to name a few. Side by side with this tool are "Site Auditor" (SA), which is an automated web site audit solution that helps you analyse websites for potential vulnerabilities soThis section is all about the best wire testers, site auditors and security testing apps. The best of them feature powerful features and help you to test the security of your website on any device as well as from anywhere.This section is about the top software tools that can be used to check any website properly and efficiently. They also help you to test your own sites without any third-party interference.The article outlines the challenges and opportunities of using a security testing tool such as WireTiger.The team at WireTiger has been making hundreds of different applications to test web applications since 2001. This is a very common task for security testers and they find it necessary to test many different types of applications. The article explores the benefits and challenges that are involved in doing this task.We can't just run a web application terminal emulator on our PCs but we need something that will simulate what it would look like as it runs on the vulnerable device or platform. This is why we need to use a security testing tool such as WireTiger which emulates browsers, servers, operating systems, etc.. Test automation tools help people automate their software testing process, which can be particularly useful for those who wouldWireTesters are testers who test software and websites to verify their functionality. They usually use automated tools to write code, run tests, or even just perform a quick check on the code as quickly as possible."Wire Tester" is a software developed by the American company WireTiger.It allows users to test and analyze cable conductors, cables as well as other electronic components. A user can scrutinize data collected using this software by running tests over a wide range of frequencies and distances. It is capable of detecting any electrical faults on the wires as well as electric arcing due to incorrect connections.As the name suggests, it consists of three parts:In this section, we will be discussing the top 10 Wire Tester tools that are frequently used by our clients to test and validate content.Our Team is offering you a Complete Solution to all your Programming needs.This is The Best& the Most Comprehensive App – Your Mobile Friendly Solution to all your Programming Needs, no other solution has got this feature.Can be used for any type of programs, including iPhone Apps and Android Apps. Can also be customized as per the user's need. This is an ALL IN ONE APP that can do everything one can imagine from a simple programmer to a complete developer within a single app. It's an All-In-One App that can do everything from Web Developers, Mobile Developers and even Security Analysts! It will take you from starting out with none of these skills to a full-scale programming expert in just 5 days! You get ALL OF THE FOLLOWING FOR FREE: - Pre"Wire Tester" is the best way to test your websites in any conditions. It can be used for security screening and penetration tests.When it comes to content generation, there are many tools available. Some are very useful and some are not so useful. To help you narrow down the options, I have rounded up 10 all-in-one tools:
Problems Needing Attention in Field Repair of Wires and Cables
Problems Needing Attention in Field Repair of Wires and Cables
In the process of cable laying on site, the phenomenon of scratch and damage on the surface of cable sheath is common, and only the sheath is damaged slightly. How to repair can ensure the quality, short repair time and ensure the quality has increasingly become a common concern of cable consumers. Moreover, the investment is small and easy to realize under the bad conditions on site. Therefore, the repair technology and quality of on-site sheath have increasingly become the concern of users. The on-site construction conditions of cables are generally poor, which may be located in the power plant under preliminary construction, the newly-built field railway under preliminary construction, on the bridge or in the cable tunnel. Because the repair of field cable sheath is carried out with plastic welding gun, and the heating of plastic welding gun requires 220V AC, it is in the emerging field project, Generally, there is a lack of power supply on site, or there may be power supply. Due to the randomness of the laying position of on-site cables, it is difficult to provide power supply. Therefore, to repair the cable sheath, on the one hand, the personnel are in place, on the other hand, the power supply is mainly provided. Only the above two basic preparations can be made, In order to realize the normal development and progress of cable sheath repair. In order to facilitate the smooth repair of cable sheath field, the construction unit shall be equipped with field small generators. At the same time, it is convenient for on-site repair. The quality of the plastic welding gun provided now should be excellent. The heating area of the nozzle should be large and the heating speed should be fast. Moreover, the damaged parts in the cable setting out process are random. This work is easy to carry out in general cities and plain areas, but in some mountainous areas, due to the influence of complex terrain, the cable repair work is actually very difficult. Therefore, in order to reduce the investment in corresponding aspects and quickly solve the problem, a key problem is that the number of personnel in the cable laying process must be sufficient, and formal cable laying equipment shall be used for formal setting out, so as to avoid and reduce the damage of sheath in the cable setting out process. The technology required for on-site cable repair is not very high. After the cable is damaged, the cable laying construction unit must repair the cable on the premise of confirming that there is no damage inside the cable, otherwise the cable sheath repair has little practical significance. The cable must be repaired in time, otherwise the entry of external moisture and moisture will affect the service life of the cable. In Meiyu weather in the south, after the cable end is laid, the cable end is not sealed in time, resulting in the water flowing into the cable trench entering the cable end for 10-20 meters. After stripping the insulation of the end, it is found that all the conductors have been blackened, resulting in the waste of the cable after laying. Therefore, the inspection of the cable after laying should be strengthened, Maintenance and storage shall be carried out to prevent the shortening and termination of cable life caused by various external factors on site before power on. Some tools and materials used for on-site repair of cables must be fully prepared. Plastic welding gun is necessary. High voltage insulating tape, waterproof tape, peeled leather of plastic insulation and sheath, and other sealing materials must also be prepared, because cable insulation and sheath materials are mainly divided into cross-linked polyethylene, polyethylene, polyvinyl chloride and other materials. Some materials are thermosetting materials, such as cross-linked polyethylene insulation, which cannot be melted and reused again. They can only be repaired with high-voltage insulating tape and repair tape series provided by 3M company in the United States. Some materials belong to thermoplastic materials, which can be melted and used again at high temperature, such as polyethylene, polyvinyl chloride and other materials. Some materials can be taken on site, and the corner sheath material stripped from the cable end can be cut into thin strips to repair the insulation and sheath of low-voltage cables, The repair quality can fully meet the requirements of the normal service performance of the cable. In addition, the treatment of sheath damage of medium voltage cable during on-site laying should not be too rough. One is that the cable must be handled with care during the laying process. In addition, after the external damage of the cable, the damage of its internal insulation is sometimes hard to say, The author once conducted a return test on the cables with multiple damaged outer sheath caused by careless construction in the field laying process, and found that partial discharge exceeded the standard and breakdown occurred in the damaged parts of the cables. Therefore, for medium voltage power cables with damaged outer sheath in the field laying process, it is best to cut off the intermediate joint or replace the cable again, Because there may be hidden dangers after repairing the damaged part of the cable. Facts have proved that the repair of insulation and sheath of low-voltage cables must be slightly damaged. The repair of insulation and sheath can only be carried out on the premise that the insulation and sheath are damaged and other structures of cables are intact. The requirements of medium and high-voltage cables may be more stringent. In order to reduce the number of intermediate joints of cables in cable transmission of some projects now, All cables are long-length single core cables. Due to the long laying distance of the line, responsible terrain, the number of construction personnel and the lack of professional cable laying equipment, the probability of cable sheath damage during the construction process is greatly increased. After the above problems occur in some construction, it is irresponsible to wrap a bag of ordinary tape casually. There is no knowledge of the internal damage of the cable damage point. Insulation breakdown or potential quality hazards are likely to occur during the on-site completion test and later operation of the cable.
What Are the Test Steps for Cable Failure
What Are the Test Steps for Cable Failure
The detection of cable fault generally goes through four steps: diagnosis, ranging, path finding and fixed point. 1. Diagnose the nature of cable fault, that is, determine the type and severity of fault, so that testers can suit the remedy to the case and select appropriate cable fault location and fixed-point methods. Measure the fault resistance with a megger and multimeter to determine whether the cable fault is high resistance or low resistance; Flashover or closed fault; Whether it is grounding, short circuit, disconnection, or a mixture of them; Is it single-phase, two-phase or three-phase fault. 2. Ranging cable fault location, also known as rough measurement, uses instruments to determine the fault distance at one end of the cable. The common fault location methods on the site include classical bridge method and modern traveling wave method. Use jcd-971 cable fault locator or cd-71 cable fault locator. 3. Use pd2000 cable path identifier or cd-12 / 22 cable path identifier produced by Zibo Electric Co., Ltd. for path finding. 4. Fault location acoustic magnetic synchronization method: use cd-81 cable fault locator to synchronize with the discharged electromagnetic signal and digitally sample the sound signal, The sound waveform at the moment of discharge is displayed on the LCD screen. The waveform can be maintained continuously for the operator to distinguish carefully, avoiding the disadvantage of transient sound. Moreover, the actual discharge waveform is obviously different from the surrounding noise. More importantly, the sound waveforms of multiple discharges are very similar. When the sound waveforms of multiple discharges are observed to be the same, It can be clearly judged that the discharge sound has been collected. Because the response range of acoustic measurement method is generally very small, when the discharge sound is heard, it is very close to the fault point, generally not more than 5m, or even within 1-2m
no data
Contact Us
Leave a message
We welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
During 15 years development, Noyafa has become the most famous brand in cable testing industry in China. With excellent production capability, reliable quality, good after-sales service, we get good reputation from customers all over the world.
no data
Contact Person:Lory Liu
Contact Us

+86-0755-27530990

If you have any question, please contact Lorry via

wire@noyafa.com

Add:Wanjing Business Center, #2506 Xinyu Road, Xinqiao, Baoan District, Shenzhen, China

Copyright © 2021 NOYAFA | Sitemap 

chat online
Please message us and we ensure to respond ASAP, what product you intrested in?