What Is Lan Cable Tracer?

What Is Lan Cable Tracer?

2021-11-11
NOYAFA
46

On this page, you can find quality content focused on lan cable tracer. You can also get the latest products and articles that are related to lan cable tracer for free. If you have any questions or want to get more information on lan cable tracer, please feel free to contact us.

During the production of lan cable tracer, SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED is doing the best for quality management. Some quality guarantee plans and activities are developed in order to prevent nonconformities and to ensure the reliability, safety and efficiency of this product. The inspection can also follow the standards prescribed by customers. With guaranteed quality and wide application, this product has a good commercial prospect.NOYAFA products are expanding the influence in the global market. These products enjoy a remarkable selling record in many countries and are gaining more and more trust and support from repeated customers and new customers. The products have received lots of compliments from customers. According to feedback from many customers, these products allow them to gain an advantage in the competition and help them spread fame and reputation in the market.At Best Cable Tester Supplier in China _ Noyafa, customers can get lan cable tracer and other products with considerate and helpful services. We provide advice for your customization, helping you get the proper products that meet the need of your target market. We also promise that the products arrive at your place on time and in goods condition.
more products
recommended articles
Info Center News
In Depth Understanding of Live Cable Identifier
In Depth Understanding of Live Cable Identifier
Everyone should be familiar with the live cable identifier. Xiaobian introduced it in the previous article. It is a very common cable construction and maintenance equipment. At present, there are both instruments for identifying non operating cables and instruments for identifying operating cables. Now we will introduce some knowledge about live cable recognizer. 1、 The transmitter panel of live cable identification instrument is introduced as follows: 1. Signal output port: this port sends the signal to the cable to be tested through direct connection coupling. The instrument can automatically detect the connection mode (direct connection or coupling). When no output line is connected to this port, the screen mode menu displays idle, and no signal is output at this time. 2. Frequency switching: the instrument has four output frequencies: low frequency, intermediate frequency, high frequency and radio frequency. It is suitable for different test systems and has strong anti-interference ability. When this button is pressed, the frequency will be switched between the above frequencies in turn. 3. Power regulation: the instrument adopts constant power output mode, and low, medium and high gears are optional. When this button is pressed, the power will be switched between the above gears. 4. Backlight switch: the instrument has a backlight controllable function. The backlight can be turned off during the day to save power. At night, the backlight can be turned on for test. When this button is pressed, the backlight will be turned on. When it is pressed again, the backlight will be turned off. 5. Power switch: the main switch of the whole instrument. When this button is pressed, the instrument enters the test interface. 6. Liquid crystal display of cable identification instrument: the instrument adopts liquid crystal display for man-machine dialogue. 2、 Precautions for the use of live cable identifier 1. If the operating cable has voltage and there is no load, there is no current flowing on the cable. At this time, the magnetic field cannot be detected. It is considered to be an uncharged cable, which is very easy to misjudge. 2. If the cable is not running, but if this cable is parallel to other running cables, there will be induced current and magnetic field. At this time, the instrument will also have indication, and misjudgment will occur. 3. If there are multiple cables in the cable trench, these multiple cables will generate a magnetic field. At this time, there will be a magnetic field generated by 50Hz current in the whole area. At this time, there will be a magnetic field in the whole area, which makes the discrimination impossible. It is easy to misjudge. 3、 Basic parameters of live cable recognizer insert the red and black wiring plugs of the transmitting caliper a into the two red and black wiring posts corresponding to the transmitting source, and clamp the transmitting caliper a on the identified cable. The arrow on the transmitting caliper a points to the cable terminal. On the identified cable two meters away from the transmitting caliper, clamp the receiving caliper B to the cable, and the arrow on the caliper must point to the cable terminal. Then check the current direction and test connection direction. At the identification point, identify each cable with receiving caliper B. During identification, the arrow on the receiving caliper must always point to the terminal direction of the cable, and the cable shall be clamped one by one. On the identified cable, the current meter pointer of the receiver must be deflected to the right, and the audible and visual alarm prompt shall be given at the same time.
What Are the Components of the Underground Pipeline Detector
What Are the Components of the Underground Pipeline Detector
The underground pipeline detector can quickly and accurately detect the location, direction and depth of underground water pipelines, metal pipelines and cables, as well as the location and size of damage points of anti-corrosion coatings of steel pipelines without damaging the ground covering soil. It is one of the necessary instruments for the transformation, maintenance and general survey of underground pipelines in water supply companies, gas companies, railway communications, industrial and mining and infrastructure units. Explain the components of underground pipeline detector 1. High voltage source: used to support discharge; Raise the DC and AC power supply to 3 4KV high voltage, the current is about 20mA high voltage power supply, and the other is 20kHz or 40KHz high frequency power supply. 2. Discharge electrode: send out high-voltage arc to melt the optical fiber; A pair of electrodes * * in a 30 degree conical shape are processed from gold tungsten rods and installed on the electrode frame. The electrode * * spacing is generally 0.7mm; When the high-voltage source is connected, an arc will be generated to fuse the optical fiber at the center of the arc. The service life of the electrode is generally 4000 times. If the electrode is consumed excessively and continues to be used, the connection loss will be increased. Underground pipeline detector 3. Optical fiber regulating device: used to align the optical fiber; The fine adjustment of the V-groove is realized by a spiral micrometer installed at the end of the long benchmark. The optical fiber placed in the v-lane slot is fixed by the mechanical pressing plate. The fine adjustment of the X and Y directions and the Z axis of the optical fiber are orthogonal to each other. The fine adjustment range is more than ± 10um and the adjustment accuracy is ± 0.1mm. Slide rail of optical fiber welding machine 4. Controller: system algorithm processing; It includes telepresence unit and microprocessor, which is used to complete automatic adjustment, pre fusion, fusion and connection loss estimation. 5. Microscope (optical system): used to help observe the state of optical fiber and welding quality. 6. Underground pipeline detector heater (heat furnace): it is used to heat shrink the heat shrink pipe and increase the strength of optical fiber connection.
Pulse Method of Cable Fault Tester
Pulse Method of Cable Fault Tester
Cable plays a very important role in daily life. If the cable fails, find the fault point in time and then repair it. Cable fault detector is the preferred tool for cable maintenance. It can accurately find the fault point, and then the construction personnel can carry out maintenance quickly, which is very effective in improving work efficiency. Today, we follow the cable fault tester manufacturer to understand what pulse method is. Working principle of power cable fault tester power cable fault tester consists of three main parts: power cable fault tester host, cable fault locator and cable path tester. The host of the cable fault tester is used to measure the nature and total length of the cable fault and the approximate position between the cable fault point and the test end. The cable fault locator determines the location of the cable fault point based on the approximate location of the cable fault point determined by the host of the cable fault tester. For buried cables with unknown direction, a pathfinder shall be used to determine the underground direction of the cable. The basic method of power cable fault test is to apply high-voltage pulse to the fault power cable to produce breakdown at the cable fault point. When the cable fault breakdown point discharges, it generates electromagnetic wave and sound at the same time. The working principle of the application of arc reflection method (secondary pulse method) in cable fault location: firstly, a high voltage pulse with a certain voltage level and energy is applied to the faulty cable at the test end of the cable to make the high resistance fault point of the cable break down and burn arc. At the same time, add the low-voltage pulse for measurement at the test end. When the measurement pulse reaches the high resistance fault point of the cable, it encounters an arc and reflects on the surface of the arc. When arcing, the high resistance fault becomes an instantaneous short-circuit fault, and the low-voltage measurement pulse will change obviously in impedance characteristics, so that the waveform of flashover measurement becomes a low-voltage pulse short-circuit waveform, making the waveform discrimination particularly simple and clear. This is what we call the secondary pulse method. The received low-voltage pulse reflection waveform is equivalent to the waveform of a complete short circuit between the core and the ground. Superimpose the low-voltage pulse waveform obtained when releasing the high-voltage pulse and when not releasing the high-voltage pulse. The two waveforms will have a divergence point, which is the reflected waveform point of the fault point. This method combines low-voltage pulse method with high-voltage flashover technology, which makes it easier for testers to judge the location of fault point. Compared with the traditional test methods, the advantage of the secondary pulse method is to simplify the complex waveform in the impulse high-voltage flashover method into a simple low-voltage pulse short-circuit fault waveform, so the interpretation is very simple and the fault distance can be accurately calibrated. The multiple pulse method adopts the double impact method to prolong the arc burning time and stabilize the arc, which can easily locate the high resistance fault and flashover fault. Cable fault tester manufacturers believe that the multiple pulse method has advanced technology, simple operation, clear waveform and fast and accurate positioning. At present, it has become the mainstream positioning method of high resistance fault and flashover fault. The multiple pulse method is an upgrade of the secondary pulse method. The method is to first measure the reflected waveform of the low-voltage pulse without breaking through the fault point of the measured cable, then impact the fault point of the cable with the high-voltage pulse to generate an arc, trigger the medium voltage pulse when the arc voltage drops to a certain value to stabilize and prolong the arc time, and then send the low-voltage pulse, Thus, the reflected waveform of the fault point is obtained. After the superposition of the two waveforms, it can also be found that the divergence point is the corresponding position of the fault point. Because the medium voltage pulse is used to stabilize and prolong the arc time, it is easier to obtain the fault point waveform than the secondary pulse method. Compared with the secondary pulse method, the triple pulse method does not need to select the synchronization time of arc burning, and the operation is also more simple. Cable fault tester is a comprehensive cable fault detection instrument. It can test the high resistance flashover fault, high and low resistance grounding, short circuit, cable disconnection, poor contact and other faults of the cable. If equipped with the acoustic method pointing instrument, it can accurately determine the position of the fault point. It is especially suitable for testing power cables and communication cables of various models and different levels of voltage. The above is the introduction of the pulse method by the cable fault tester manufacturer, hoping to provide help to those in need.
How to Better Find the Fault of Buried Cables in Rural Areas
How to Better Find the Fault of Buried Cables in Rural Areas
In the transformation of China's agricultural network, buried lines have been adopted in many areas. Although PVC insulated plastic wire has many advantages, such as good chemical stability, no occupation of farmland, safe operation and reduction of line loss, after long-term use, due to various reasons, the fault phenomenon of buried wire is gradually increasing. Let's take a look at how to carry out the fault finding of buried cables in rural areas. Methods and characteristics of fault finding and detection of buried cables in rural areas. 1. Analysis and judgment method for the fault of buried line, generally, we should first understand the relevant situation of the fault, then conduct comprehensive analysis, find out the cause of the fault, and then find and eliminate it pertinently. For example, finding informed parties, such as construction workers, wire users, and other relevant personnel to understand the situation in detail, can often eliminate the fault in the shortest time and at less cost. It has the advantages of simple operation, no need for complex instruments, and can eliminate some faults in time. This method is generally not used alone, but in combination with other instrument detection methods. 2. In recent years, the intelligent cable fault tester is widely used to detect the fault buried wire. Therefore, many electricians and maintenance personnel are not familiar with the fault finding and detection methods of rural buried cables. In case of underground pipeline failure, if there is no advanced detection equipment and good detection means, the failure can often not be eliminated within the service period promised by the power supply enterprise, which not only delays time and wastes manpower, but also affects the image of power users and frustrates the enthusiasm of farmers to transform the rural power network. Therefore, rural land buried lines need more specialization. More efficient fault detection equipment. 3. Compared with buried wires, buried power cables have been used in China for decades. The buried cable fault tester has developed from resistance bridge, capacitance bridge and standing wave test to flashover test. The development of the instrument has experienced the ordinary oscilloscope tube display flash lamp and the storage oscilloscope tube display flash lamp. At present, the intelligent instrument has been developed. The instrument adopts new technologies and processes such as large-scale integrated circuit, computer processing technology and large screen LCD. The power cable tester is used to transform it and detect the buried line fault. The effect is good and the efficiency is high. After a lot of practice, the detection of a buried line fault generally does not exceed 30 minutes from the beginning to the end, and the accuracy is very high.
Model Prototype Exercise: Handheld Electric Screwdriver
Model Prototype Exercise: Handheld Electric Screwdriver
To practice designing 3D low-fidelity prototypes, I was tasked to prototype an OXO handheld electric screwdriver as a new opportunity to expand their business into new product lines.Designing for OXOs Brand IdentityBefore sketching out design ideas, I wanted to familiarize myself with the OXO brand, hoping that the form of my design will match with OXOs brand identity. OXO incorporates comfortable and easy to use tools, while also applying simple,universal design. When I was sketching, I wanted to prioritize comfort, which is why the designs for the screwdriver include a hand grip area for the user to comfortably hold the screwdriver. I also attempted to emulate the simple designs of OXO, because the interfaces to be as minimalist as possible.Additionally, the sketches addressed the product requirements of a fluid speed control, a automatic screw driver selection (shape and size), direction mechanism (screwing in vs. screwing out), and a progress digital readout (number of screws in and out).PrototypeI created a handheld electric screwdriver prototype that is 6 inches long. With rocks and Easter eggs filled with rice inside, the prototype weighs one pound, emulating the actual weight of the product. Shape & FormI wanted the shape and form of the screwdriver to be comfortable and intuitive for the user. The handle on the screwdriver is slightly curved to emulate the natural grip when holding an object around your hand. I also included tape around the area to represent different material that would be incorporated for comfort. Additionally the handle is suitable for left-handed users or right-handed users.FunctionalityThere are several functionalities that make the prototype, including speed control, screw driver shape/size selection, screw driver direction, and a digital readout component. The screwdriver will also have a rechargeable battery. Fluid Speed Control Mechanism: I incorporated a fluid speed control under tucked in the handle for easy access to change the speed of the screwdriver while holding it at the same time. The sensor will capture the pressure of the grip and change the speed accordingly. The white thumbtack shown in the left image above is located where ones index finger would be, a intuitive hold and position to be controlling the speed. Screw Driver Selection Mechanism (shape/size): For the screw driver shape and size selection, this screwdriver supports 2 different head changes (Phillips or flat) and 5 different sizes. This screw driver shape and size is presented on a touch screen, where the user can tap to select different heads and sizes. After the user will press set for the screwdriver to automatically change shape/size. This interface is above the gripped area to avoid accidental switches in screw driver. Additionally the interface faces the user when they hold onto the screwdriver, allowing for easy visibility of the current setting of the screwdriver.Screw Driver Direction Mechanism: The screw driver direction mechanism is located on the side of the screwdriver with a slider mechanism to change the direction based on if the user is screwing in versus out. Digital Readout Component: The digital readout component shows the number of screw in and out below the direction mechanism. The reset button allows for the user to set the count back to 0.Rechargeable Battery: The screwdriver is rechargeable and the battery is placed inside the bottom of the screwdriver. AnalysisAfter finalizing the prototype, my peer members were able to give critiques and I was able to conduct one in-depth user test on all functionality. Click on the link below to view a snippet of the user test.What went well?Many users enjoyed the fit and weight of the prototype, explaining that the curved form of the screwdriver fit well with their grip and how they would intuitively hold the screwdriver. Users found the reset button on the count of the number of screws in and out practical and functional even thought it wasnt a product requirement.The speed control was intuitive for everyone, knowing that the harder they pressed the faster the head would turn. All users found the button placed in a comfortable position where their index finger was. The placement of the rechargeable battery was intuitive for all users.What needed improvement?Many users were confused with the digital readout component that indicates the count of screws in and out. Manyusers were unable to initially understand what the numbers stood for. There was uncertainty with the set button, expressing confusion on the ordering of changing the heads of the screwdriver. If the set button should be pressed before or after selecting the shape and size.The placement of the reset button may get in the way when gripping the screwdriver, possibly causing unintentionally reset of the digital readout. Additionally there was no way to reset only one of the digital readout numbers. So if a user wanted to reset only the number of screws in, this would not be possible.Takeaways & Next StepsOverall based on this analysis, the most effective component of the prototype was the shape/form of the screwdriver as well as the fluid speed control mechanisms. Both were praised and intuitive for users. However, the least effective component was the interface of the digital readout component. By using icons paired with labels of in and out the digital readout component can be more clear on what is being represented. Additionally if the slider is placed between the label and the actual readout component, the label would be on the top, possibly better indicating what the digital readout is and what the in and out slider does.Next steps would be to improve on the interfaces of the digital readout component, since this was the least effective functionality. After improving on the new interface, the next step is to do another round of critique and user testing. RELATED QUESTION Which is the best natural face mask for dark and oily skin? Hello there,The Best Face Mask for Oily SkinOily skin can be a major cause of acne because the pores are constantly clogged. This is why you need a great mask to help get rid of excess oil in the pores and on the skin.This mask works hard at regulating oiliness, soothing acne flare-ups and soothing the skin. To make the mask, you will need:1 apricot1 tablespoon of natural yogurt1/2 teaspoon of cosmetic clayDirections:Blend the apricot in a food processor. Add the yogurt and the clay and mix it until it becomes a smooth paste.Apply the mixture to your face and allow it to dry for 20 minutes before rinsing it off with lukewarm water. We love DIY face masks because of their easy to make recipes and all-natural ingredients.Heres some best face mask for all skin problems. You can make it easily at your home.1. The Activated Charcoal Acne Face Mask2. The Avocado & Honey Acne Blasting Face Mask3. The Honey Acne Face Mask4. The Cucumber Acne Face Mask5. The Turmeric Face Mask for Acne6. The Aloe Vera Acne Face Mask7. The Cinnamon Acne Face Mask8. The Apple Cider Acne-Fighting Face MaskGet the face mask recipe and benefits here:22 Of The Best Natural Face MasksI hope this might be help you to get rid of oily skin.Thank You!
How Screwdriver Organizers Are Advantageous?
How Screwdriver Organizers Are Advantageous?
Screwdriver Organizer is a compact provision to keep different types of screwdrivers organized in one place. It is really difficult for the electricians, technicians, mechanics, and automobile engineers to keep their tools safe and away from theft and misplaced. Mostly technicians suffer from the theft or loss of screwdrivers as it is not possible for them to keep surveillance on their tools all the time. And that is why an organizer plays a great role in changing this scenario.What is Screwdriver?It is a manual or powered tool used for rolling the screw in or for rolling the screw out from the object. Screwdrivers are made of different metals as if, iron, steel, stainless steel, aluminum, etc. These tools come in different sizes and cuts on its tip point.Benefits of Organizer:-Easy to CarryScrewdriver Organizer is an easy to carry option for any individual of any weight and size. Some of the organizers are available in the market with rollers on the bottoms which makes it easier to carry bulk tools. Safer ProvisionIn this carrying, case screwdrivers can be kept safe for a long time because there are different segments designed as per the size of the tools. So, there are fewer chances of damage.Smart ManagementThese organizers are well known for smart management of the screwdrivers as the outer casing is designed solid and its internal design is apt for any sort of tool to be kept gripped.Space OptimizationAvailable space is properly optimized in these organizers as different types of cuts and strap cuts are made to hold and pick the screwdrivers easily. Each inch and the edge are used smartly to fix different sized tools.Neat & Clean ToolsBy keeping your tools in this type of organizer, you actually opt for the neat and clean maintenance of your tools.Long-Term SolutionIt is considered to be a long-term solution among all the users in the global market now, as it provides a safe casing for all your tools and equipment for the long-run which actually increases the life of screwdrivers. Smart InvestmentBuying an organizer will be a smart investment for one and all as it will keep your tools in good condition and next time when you will need your tools, it will be readily available.Screwdriver organizer has made life easy for all the technicians and mechanics forever
Analyze the Problems That May Be Encountered in the Fault Detection of Pipeline Detector
Analyze the Problems That May Be Encountered in the Fault Detection of Pipeline Detector
Pipeline detector is one of the important equipment for underground pipeline survey. It can accurately and quickly detect the direction and location of various underground facilities under the condition of ensuring the integrity of ground covering soil. What we want to know today is the purchase method of the detector and some problems that may be encountered in the fault detection of the pipeline detector. You can study it carefully. The pipeline detector can quickly and accurately detect the position, direction and depth of underground water pipeline, metal pipeline and cable, as well as the position and size of the damage point of the anti-corrosion coating of steel pipeline without damaging the ground covering soil. It is one of the necessary instruments for water supply companies, gas companies, railway communications, municipal construction, industrial and mining, capital construction units to transform, maintain and survey underground pipelines. How to choose a pipeline detector? Here, I share my views with you, hoping to be helpful to you. 1. According to your own needs: many pipeline instruments are only suitable for some detection requirements. When selecting, you should understand the application scope of pipeline instruments. 2. Understand the test method of the pipeline instrument, whether the operation is simpler and the interface is more intuitive. 3. Understand the function of the pipeline instrument and whether the sounding capacity meets your needs. 4. Whether the configuration of accessories is complete, such as clamp (generally used for cable detection in dense areas), rechargeable battery (saving detection cost), etc. 5. The sustainable development of the instrument and the ever-changing technology are also a test standard of the instrument. 6. The compatibility of the instrument, whether the reception and transmission frequencies are wide, which is conducive to detection and expansion of use. In urban construction, urban underground pipeline data is very important. Pipeline detector manufacturers understand that many underground pipelines are troubled by aging and drawing changes during construction. At present, the detection work has been carried out in an all-round way. With the help of pipeline detector, supervise the whole process of project quality, project progress, operation safety and achievement archiving of underground pipeline detection. After the general survey, the results table will be prepared, the data function of the pipeline detector will be used, and the database and underground pipeline information management system will be established. It is a common situation for us to carry out detection in the completed area, which is a common problem in the fault detection of pipeline detector. For example, the general urban exploration work will encounter the interference of many urban buildings. At this time, it is necessary to rely on the sensing function of the pipeline detector for underground exploration. In the completed area, the operation procedure of the pipeline detector is: first, use the geophysical method to detect the category pipe diameter of each pipeline or the items of the inner bottom, upper pipe and outer top of the cross-section pipe (ditch) on the spot, and mark each characteristic point on the spot, then use the total station or RTK to measure the three-dimensional coordinates of each characteristic point, and then use the mapping software to draw the collected data on the topographic map for editing.
no data
Contact Us
Leave a message
We welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
During 15 years development, Noyafa has become the most famous brand in cable testing industry in China. With excellent production capability, reliable quality, good after-sales service, we get good reputation from customers all over the world.
no data
Contact Person:Lory Liu
Contact Us

+86-0755-27530990

If you have any question, please contact Lorry via

wire@noyafa.com

Add:Wanjing Business Center, #2506 Xinyu Road, Xinqiao, Baoan District, Shenzhen, China

Copyright © 2021 NOYAFA | Sitemap 

chat online
Please message us and we ensure to respond ASAP, what product you intrested in?