What Is Noyafa Products?

What Is Noyafa Products?

2021-11-10
NOYAFA
10

On this page, you can find quality content focused on noyafa products. You can also get the latest products and articles that are related to noyafa products for free. If you have any questions or want to get more information on noyafa products, please feel free to contact us.

noyafa products is designed by SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED with the rigorous attitude. We strictly perform testing at each phase to make sure that every product received by customers is excellent quality because a low price doesn't save anything if the quality doesn't meet the needs. We thoroughly inspect every product during manufacturing and every piece of product we manufacture goes through our strict control process, ensuring that it will meet the exact specifications.NOYAFA stands out from the herd when it comes to brand impact. Our products are sold in a huge amount, mainly relying on word of mouth of customers, which is by far the most effective form of advertising. We have won many international honors and our products have occupied a large market share in the field.noyafa products is designed to meet all the desires and explorations of our customers. To achieve that, we aim to provide the best possible and satisfactory service at Best Cable Tester Supplier in China _ Noyafa for ensuring a pleasant shopping experience.
more products
recommended articles
Info Center News
Principle of Cable Fault Tester
Principle of Cable Fault Tester
At present, the cable fault tester based on impulse flashover method used by the majority of users of power cable fault tester can easily roughly measure the distance of fault point with rangefinder when solving low resistance fault and dead ground fault of low-voltage cable (the distance test of such fault point does not need high-voltage discharge equipment, but uses low-voltage pulse method), However, the method of lighting fire, discharging and listening to sound is still used to locate the fault point. At the same time, the Pathfinder and fixed-point instrument of this kind of instrument are separated, which makes it impossible to synchronize the fixed-point when finding the path, and the fixed-point often deviates from the path. Moreover, due to the limitations of the principle, it is difficult to find the accurate path of the cable when finding the cable path, It is generally between 1-2 meters wide. Starting from practicability, hn-a10 series cable fault locator just makes up for the above defects. It can test the fault point location, buried depth and path synchronization of cable. The indication of fault, path and buried depth of the instrument is very intuitive, without technical analysis and completely independent of the operator's experience. It makes the originally tedious fault test work become a relaxed and interesting thing. Therefore, if the majority of impulse lightning cable tester users have another ht-tc cable fault locator and the original distance finder, they can form a set of perfect low-voltage cable fault tester. At the same time, the low resistance and open circuit faults of high-voltage cables can also be quickly fixed, and the work efficiency can be improved several times. In fact, the majority of power consuming enterprises and units rarely contact the maintenance of high-voltage cables in daily production, because the maintenance right of high-voltage cables is generally specially maintained by the prefecture and municipal power departments. The number of low-voltage cables is far greater than that of high-voltage cables. For enterprises, factories and mining units, residential areas, scientific research institutes, more developed towns and villages, colleges and universities, some small and medium-sized cities and county-level power supply bureaus, the solution of low-voltage cable faults is what they are most concerned about. In fact, what low-voltage cable users need is a tool tester with simple operation, convenient carrying, strong practicability, low price and suitable for field operation. Because the insulation strength of low-voltage cable is low, if the method of ignition and discharge is used to test the fault of low-voltage cable, we find that this method sometimes causes secondary fault. More seriously, after ignition and discharge, the service life of the cable will be reduced and the fault incidence will be increased, which will seriously affect the normal power supply and production.
Negative Sequence Current and Negative Sequence Voltage Components Appear in Cable Fault Tester
Negative Sequence Current and Negative Sequence Voltage Components Appear in Cable Fault Tester
Relays used in the circuits of relay protection devices and electrical automatic devices are generally made of electromagnetic, inductive, electrodynamic and magnetoelectric principles. In recent years, there have been magnetoelectric devices using rectified current, magnetic relays with saturated inductance coils and electronic relays, and relays using semiconductors are being studied. The purpose of studying and adopting these new principles of relays is to simplify the structure of relays, improve their reliability and improve their parameters. Use indirect methods to indicate that there is a fault or improper working state in the power system. For example, this kind of relay has the ability to react with the generation of gas, the generation of heat, the increase of pressure, etc. The relay protection device must have the function of correctly distinguishing whether the protected element is in normal operation state or has a fault, whether it is a fault in the protection area or a fault outside the protection area. In order to realize this function, the protection device needs to be composed based on the characteristics of changes in electrical physical quantities before and after power system failure. The three-phase / six phase relay protection tester is developed by using Zui new digital technology, high-precision electronic devices, microcomputer system and new structure of line and cable fault tester. It can independently complete the device test in professional fields such as microcomputer protection, relay protection, excitation, measurement, cable fault tester and fault recording. It is widely used in scientific research, production and electrical test sites in electric power, petrochemical, metallurgy, railway, aviation, military and other industries. After power system failure, the main characteristics of power frequency electrical quantity change are: (1) current increase. In case of short circuit, the current on the electrical equipment and transmission line between the fault point and the power supply will increase from the load current to greatly exceed the load current. (2) Voltage drop. In case of phase to phase short circuit and grounding short circuit faults, the phase to phase voltage or phase voltage value of each point of the system decreases, and the closer to the short circuit point, the lower the voltage. (3) The phase angle between current and voltage changes. During normal operation, the phase angle between current and voltage is the power factor angle of load, generally about 20. In case of three-phase short circuit, the phase angle between current and voltage of cable fault tester is determined by the impedance angle of the line, generally 60 85. In case of three-phase short circuit in the opposite direction of protection, the phase angle between current and voltage is 180 (60 85). (4) The measured impedance changes. Measuring impedance is the ratio of voltage and current at the measuring point (protection installation). During normal operation, the measured impedance is load impedance; In case of metal short circuit, the measured impedance changes to line impedance. After fault, the measured impedance decreases significantly and the impedance angle increases. Negative sequence current and negative sequence voltage components appear; In case of single-phase grounding, negative sequence and zero sequence current and voltage components appear. These components do not appear during normal operation. The relay protection of various principles can be formed by using the change of electrical quantity during short-circuit fault.
Best Cable Tester& Cable Tester Software
Best Cable Tester& Cable Tester Software
This article will help you find the best cable tester for your needs.A good cable tester is more than just a cable tester. It should be able to give a sufficient overview of the cable connections and be able to identify any problems with the connection.There are many different types of cable testers and they all do the same thing.In the cable industry, there is a need to test different cables, both for the purpose of quality assurance and in order to make sure that a certain product is compatible with different types of equipment.There are several software products available for testing cable, especially as they become more common in homes and businesses. Some of them have been designed specifically for testing cables. But the problem is that most of them require you to install it on your own computer or laptop first before you can use it. Some are hard to use and require too many settings so that you have to go through many options before finding an appropriate setting.This article will guide you through some tips on installing any cable tester properly so that you can quickly get your cable tested without having to do much research. It will also point out someWe have a cable tester, a type of cable plug that is used to ensure the quality of cables. The cable tester has four prongs and is connected to the main power supply by one wire. These wires are also connected in pairs: one goes to the positive terminal and another goes to the negative terminal. When you want to connect two wires together, you need to connect them first in pairs (with positive and negative terminals) and then separately in pairs (with positive and negative terminals) as shown below:In order for you to test whether or not two cables are connected properly, you will need a cable tester socket adapter. This device looks like an ordinary socket with only one wire on it. The connection between these two wires is made with an adapter. You can find theseIn order to make sure you get the best deals on TVs, Blu-ray players, etc., you need to do some research. You might have heard about a TV review site named "BestBuy" or a "Best Buy". You might also have found yourself going there to check out the latest offers only to be disappointed when your search didn't turn up anything interesting.As you've probably come to realize, there are a lot of possibilities when it comes to finding the best deals on TVs, Blu-ray players and other gadgets. But even if it is easier than ever before, there is still so much information that you need in order for these tradesmen and women to be able to offer quality recommendations.Best cable tester ensures that cables are properly connected to all the devices.With accurate, fast and reliable cable testers, you can easily save your business money.The cable tester software is an essential tool for any cable equipment buyer. It helps to assess the quality of a cable, measuring it's resistance and voltage.Cable testers have been in use since the 50's. The need for them is now less, but they are still widely used in the market.The best cable testers can help you to test Ethernet cables, power cables, phone wires and other wired connections. They also include various other inputs and outputs from home appliances like refrigerators, washing machines and dishwashers.The best cable testers can also be used in different situations to find out whether your device is working properly or not. If your computer isn't functioning properly, you should check the cable of it first before taking any action on it immediately to make sure that there are no faulty connections or miswired devices present in the system because of which your computer won't work properly at all. On the other hand if something goes wrong with a certain deviceToday's cable tester software/hardware is very sophisticated and works in a particular niche. This makes it a perfect fit for cable testers who are looking for precise information such as the channel number, the length of the cable and the condition of the cable.While there may be other software that can do these tasks, this software provides them quite well. This is why you should consider purchasing this software to get some competitive edge in your field.
Cable Fault Test Procedure
Cable Fault Test Procedure
When using cable fault tester (echo method) to test cable fault, the following procedures shall be followed: â‘´ multimeter, megger or judge the nature of cable fault from the cable pre-test results. (2) select the appropriate test method according to the nature of cable fault: the pulse method is best used for low resistance fault and open circuit fault. Of course, the flashover method can also be used for low resistance fault. Flashover method (impulse l method) is best used for leakage high resistance fault, and direct flashover method can also be used for some leakage high resistance faults, but this is usually not done. Direct flashover method is best used for flashover high resistance fault, or both methods can be used to measure and compare each other to improve the accuracy of judgment. (3) select the working grounding point, and lead out two grounding wires respectively from the selected grounding point, one to the ground of the instrument and the other to the ground of the high-voltage equipment. The selection principle of working ground wire is to ensure that the test phase and it form a closed loop, so that the instrument can obtain the correct test waveform. It should also be noted that the working ground wire must be connected with the system to make the human, instrument ground, high-voltage equipment ground and the tested cable ground in the same position. To ensure personal safety and integrity of instruments and equipment. If the cable is in phase to phase fault, the working ground wire must be one of the phase wires, and the phase wire as the ground wire must be connected with the system ground. For the cable with lead-free bushing, most of the faults are discharged to the earth or space during the high-voltage flashover test. Theoretically, the fault also forms a closed loop relatively to ground or space, but in fact, the equivalent impedance in the loop is quite large, so the correct test waveform can not be obtained on the instrument. In case of this situation during the test, the method of directly fixing the suspicious fault point can be adopted to solve it. No matter what ground wire, its grounding point must be reliable. (4) test the total length of the cable with the pulse method to calibrate the radio wave transmission speed of the tested cable. (5) rough test the fault point according to the selected test method. (6) fix the fault point after rough measurement.
Working Principle of Live Cable Identification Instrument
Working Principle of Live Cable Identification Instrument
As the running live cable is not allowed to damage any grounding wire and other connecting wires, nor is it allowed to directly add the output signal of the live cable identifier transmitter to the cable phase line with high voltage. Two difficult problems need to be solved for live cable identification. One is how to couple the cable identification signal to the cable; Second, the coupled signal is generally small, and the operating cable may have 50Hz power frequency electromagnetic interference composed of 50Hz unbalanced current, induced 50Hz interference current, cable distributed capacitance current, etc. the high-sensitivity receiving caliper has the problem of how to resist 50Hz power frequency interference. The charged cable identification instrument developed by US adopts single chip microcomputer coding and decoding technology and PSK technology widely used in the field of communication. The phase coded signal with an average value of 0 is transmitted on the transmitting caliper, and the single chip microcomputer in the receiving caliper performs phase identification after filtering the received signal by hardware and software. When the receiving caliper cards the cable according to the current direction, the identified cable ammeter deviates to the right, accompanied by audible and visual indication. The current direction of other cables is opposite to that of the identified cable, and the ammeter pointer deviates to the left. No audible and visual indication. This reflects the uniqueness of the identified target cable. It is easy to distinguish the identified cable from multiple cables. In addition, since the signal current strength on the identified cable is the same throughout the line, the electromagnetic signal strength received by the receiving caliper along the cable is the same. In principle, the identified cable is not limited by the length of the identified cable. Dear customers: Hello, our company is a high-quality development group with strong technical force, providing users with high-quality products, complete solutions and superior technical services. The main products are high voltage cable fault tester, cable fault tester, underground cable fault tester, etc. The enterprise adheres to the tenet of building a business in good faith, keeping the business with quality and developing the business with enterprising. It continues to climb new peaks with a firmer pace and make contributions to the national automation industry. New and old customers are welcome to buy their favorite products at ease. We will serve you wholeheartedly!
The Secret of Using Pipeline Detector
The Secret of Using Pipeline Detector
The pipeline detector basically has the following three detection methods: direct connection method, clamp method and induction method. However, the use frequency of pipeline detector can be basically divided into two categories: high frequency and low frequency. Low frequency attenuation is slow, transmission distance is long, radiation is small, it is not easy to connect in series, but penetration is poor; High frequency band high frequency band, strong penetration, large radiation, but fast attenuation and close distance. Therefore, the appropriate working frequency should be selected according to different methods. 1、 Direct connection method direct connection method is to load the signal sent by the transmitter directly onto the pipeline to be detected by the pipeline detector. Direct connection method is the best signal processing method, which is usually preferred when conditions permit. Direct connection mode is adopted, the signal is stable and not easy to be disturbed by other pipelines. In practice, cast iron pipelines and steel pipes are recommended to be tested by direct connection method, in which the use frequency can be selected according to the material of the pipeline, and the steel pipe can use low frequency, because the steel pipe has good conductivity, and the use of low frequency can be transmitted further. However, it should be noted that the signal of direct connection mode will be transmitted in two directions along the pipeline and distributed unevenly. The grounding point should be a certain distance (& gt; 5m) from the pipeline. The ground wire needle should be inserted in the soil and watered if necessary to reduce the ground wire resistance, which is conducive to signal transmission. 2、 Clamp method can be used when the signal cannot be directly loaded on the pipeline. The method is to connect the signal of the transmitter with the target pipeline through a clamp. The invention is applicable to communication, power and other pipelines. Generally, when this method is adopted, the use frequency can be selected according to the external interference. In the case of small external interference and extremely poor conductivity of the pipeline, high frequency can be used as induction. Generally speaking, we can detect with a frequency of about 33 kHz. Pay attention when using the pliers. The jaws of the pliers should be closed. In addition, although it is convenient to apply signals, the transmission distance and signal stability of this method are worse than those of the direct connection method. 3、 As the name suggests, induction method is to directly sense the signal of the transmitter to the target pipeline through non-contact mode. Generally speaking, this method can be used only when direct connection and clamp cannot be used. However, this method is greatly affected by the surrounding environment, and will produce a lot of interference when the vehicle passes through or the pipeline is close to the metal. Therefore, when selecting the frequency again, we must pay attention to avoid using high frequency for detection as far as possible, because the high frequency excitation range is large, which will cause serious interference between pipeline signals. In use, it should be noted that the distance between the transmitting end and the receiving end should be kept 10m as far as possible to avoid the frequency of the transmitting end interfering with the signal. In terms of methods, such a rule is generally followed. Direct connection can be used without pliers, and induction can be used without pliers. Frequency selection is also to select low-frequency detection as much as possible according to specific conditions. This ensures that more accurate conclusions can be drawn when using the pipeline detector.
Main Features of Cable Fault Tester
Main Features of Cable Fault Tester
Cable fault tester is a comprehensive cable fault detection instrument. It can test the cable flashover fault, low resistance grounding, short circuit, cable disconnection, poor contact and other faults. If equipped with an acoustic point detector, it can accurately determine the position of the fault point. It is especially suitable for testing power cables and communication cables of various models and different levels of voltage. The cable fault tester has the following remarkable characteristics: 1. It has complete functions and can test faults safely, quickly and accurately. The instrument adopts low-voltage pulse method and voltage flashover method for detection, which can test various faults of cables, and directly test the flashover and resistance faults of power cables without burning through. If equipped with a sound point meter, the position of the fault point can be measured accurately. 2. Test accuracy. The instrument adopts fast data sampling technology with a reading resolution of 1m. Degree of intelligence. The test results are automatically displayed on the large screen LCD with small and data, and the fault judgment is intuitive. It is also equipped with menu display operation function, without special training for operators. 3. It has the functions of wave opening, parameter storage and call out. Nonvolatile devices are adopted, and the waveform and data are not volatile after shutdown. 4. With dual trace display function. The test waveform of the faulty cable can be compared with the normal waveform, which is conducive to further judgment of the fault. 5. With waveform scaling function. By changing the waveform proportion, the waveform can be expanded for testing. 6. Control the measurement cursor to automatically search along the line and stop automatically at the inflection point of the fault waveform. 7. The position of the double cursor can be changed arbitrarily to directly display the direct distance or relative distance between the fault point and the test point. 8. With printing function. Print and archive the test results.
no data
Contact Us
Leave a message
We welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
During 15 years development, Noyafa has become the most famous brand in cable testing industry in China. With excellent production capability, reliable quality, good after-sales service, we get good reputation from customers all over the world.
no data
Contact Person:Lory Liu
Contact Us

+86-0755-27530990

If you have any question, please contact Lorry via

wire@noyafa.com

Add:Wanjing Business Center, #2506 Xinyu Road, Xinqiao, Baoan District, Shenzhen, China

Copyright © 2021 NOYAFA | Sitemap 

chat online
Please message us and we ensure to respond ASAP, what product you intrested in?