Products
Noyafa NF-168V multi function cable tracer with cable mapping and VFL functions for cable tracking 1
Noyafa NF-168V multi function cable tracer with cable mapping and VFL functions for cable tracking 2
Noyafa NF-168V multi function cable tracer with cable mapping and VFL functions for cable tracking 3
Noyafa NF-168V multi function cable tracer with cable mapping and VFL functions for cable tracking 1
Noyafa NF-168V multi function cable tracer with cable mapping and VFL functions for cable tracking 2
Noyafa NF-168V multi function cable tracer with cable mapping and VFL functions for cable tracking 3

Noyafa NF-168V multi function cable tracer with cable mapping and VFL functions for cable tracking

Integrated designed with multi functions and multi modes, NF-168V can meet customers’ requirement for cable mapping and cable tracing from it’s highlight 3 modes for each functions.

NF-168V can provide visual fault locator for customers who need to address the break point for a fiber cable, with Continuous mode or Pulse mode.

Warranty:
1 Year
Place of Origin:
Shenzhen, China
Model Number:
NF-168V
Brand Name:
Noyafa
Is_customized:
Yes
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.

    oops...!

    no product data.

    go to homepage

     

    Noyafa NF-168V
    Noyafa NF-168V multi function cable tracer with cable mapping and VFL functions for cable tracking and testing with 3 tracking modes,3 mapping modes

     

    NF-168V/NF-168S is an updated item with multifunction of cable tracing,mapping and visual fault locator (this function is only for Nf-168v)accordingto sales requirements. It follows the shells of nf-168 emitter and receiverBut compared to series products, it's highlights is three tracing modes threemapping mods, and Visual fault locator. Tracing modes---ordinary tracing,Anti-interference, POE switch; Cable mapping--fast mode, Slow mode,Manual mode: Visual fault locator-continuous mode Pulse mode.

     

     

    Noyafa NF-168V multi function cable tracer with cable mapping and VFL functions for cable tracking 4
    Noyafa NF-168V multi function cable tracer with cable mapping and VFL functions for cable tracking 5

     

    Product Interface and Keypad Introduction
    bg

     

    Noyafa NF-168V multi function cable tracer with cable mapping and VFL functions for cable tracking 6

     

     

    Operation Methods
    bg

     

    Noyafa NF-168V multi function cable tracer with cable mapping and VFL functions for cable tracking 7
    Basic tracing
     
    Emitter

     

    Push the key to “SCAN” to enter the basic tracing mode, then blue indication flashes, which means the emitter works well. Connect one end of network cable/telephonecable(BNC cable only for NF-168S) to the RJ45/RJ11 (BNC cable only for NF-168S)port of launcher.

     

    Receiver

     

    Push the key to “Basic”, the brightness of indicator and the sound of the speaker isdynamically changed according to the the signal strength. (note that in this mode, even if there is no signal, the indicator and the speaker will have a weak changed), whichmeans the receiver works well, then hold the receiver to find the target line.

     

    Tracing mapping ( RJ45 as an example)
    bg

     

    •   Connect two ends of network calbe to the RJ45 port of launcher and receiver separately.
    •   And push the key to “test”, the wire sort indicators will flash, which means the transmitter works well.
    • ◪   If the wire is normal, and the GND is not connected, then the 8 indicators will flash one by one. And if GND is connected, then the 1 to 8 and G indicators will flash one by one.
    • ◪   If there is miswires as below. If line“2” is open, then the 2 indicator of emitter and receiver will not flash. If there is several lines are open, the corresponding indicators will not flash. And if less than 2 lines are connected, none of the lights is on. When the line are cross, for example, line“2” and line“3” disorder, the indicators flash as follows.
    • Transmitter : 1-2-3-4-5-6-7-8-G Receiver: 1-3-2-4-5-6-7-8-G
    • When there is short circuit of line“2” and “3”, the 2 and 3 indicators of receiver will not flash while the other lights still do.
    Other Functions
    bg

     

    (1) Low-voltage hint function

    When the battery is low (≤6V), push the function button to “scan” or “test”, at this time, both the scan indicator and wire sorting indicator will flash, which means the battery should be replaced.

     

    (2) Earphone function

    The earphone can be worn in noisy environment for operation so as to avoid external interference. 

     

    3) Sensitivity adjustment function

    Turn the sensitivity adjustment knob on the receiver when tracing cable to adjust the value to be the appropriate degree.

     

    (4) Floodlight function

    The side floodlight can be started at night or in dark. The floodlight turns on so as to facilitate your normal operation. 

     

    (5) Wire sorting directly with switch

    Connect the line to be tested with transmitter and switch,then get the result from flashlights.

     

     

    Specification
    bg

     

     

     

     

     

     

     

     

     

     

     

     

           Emitter

     

     

     

     

     

     

     

     

     

     

              Tracing

    Compatible cable RJ45, RJ11, BNC cable
    Max. signal voltage 8±1.0Vp-p
    Max valume 105dB 
    Tone frequency 455Hz 
    Tone mode 1 Tone
    Ordinary tracing YES 
    Anti-interference YES 
    Distance of transmission RJ45 300M non-load/load 

     

     

    VFL  (NF-168V)

    Wave length  650nm 
    Power  5mW
    Mode Constant ight mode, Blinking mode
    Mapping  Fast, slow, manual 
    Battery Type  DC9.0V(6F22 DC9V x 1pcs)
    Battery low indicate 6.0V±0.5V
    Voltage protection DC 60V
    Max. working current  Less than 100mA
    Dimension(LxWxD) 146*57*30mm

     

     

     

     

     

     

     

     

     

     

    Receiver

    Anti interference reception YES
    Sensitivity adjust  YES 
    Ordinary Huting  YES 
    Earjack  YES 
    LED lighting  YES 
    Battery Type  DC9.0V(6F22 DC9V x 1pcs)
    Power indicate  LED Power indicator 
    Battery low indicate  6.0V±0.5V
    Max. working current  ≤150mA
    Dimension(LxWxD)  187*46*27mm

     

     

    get in touch with us
    just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs
    Related Products
    no data
    During 15 years development, Noyafa has become the most famous brand in cable testing industry in China. With excellent production capability, reliable quality, good after-sales service, we get good reputation from customers all over the world.
    no data
    Contact Person:Lory Liu
    Contact Us

    +86-0755-27530990

    If you have any question, please contact Lorry via

    wire@noyafa.com

    Add:Wanjing Business Center, #2506 Xinyu Road, Xinqiao, Baoan District, Shenzhen, China

    Copyright © 2021 NOYAFA | Sitemap 

    chat online
    Please message us and we ensure to respond ASAP, what product you intrested in?